You cant ! Dollars is a monetary unit, mils is a unit of volume and kw is a unit of electrical energy ! NONE of which have any relation to each other !
To convert cents per kilowatt-hour (kWh) to dollars per megawatt (MW), you can use the following conversion factors: 1 MW equals 1,000 kW and 1 dollar equals 100 cents. Therefore, to convert cents per kWh to dollars per MW, you multiply the value in cents by 10. For example, if the rate is 10 cents per kWh, it would be equivalent to $100 per MW.
KWH (kilowatt-hours) is an energy (Power in KW x time in Hours if steady power, or otherwise the integral of power with respect to time). KW per minute means a rate of increasing power, and the fact that it is inside a cubic metre doesn't alter the fact that there is no equivalence, and cannot be related.
that should be 2.8KW
To convert kilowatts (kW) to cubic centimeters (cc), you need to clarify the context, as kW measures power and cc measures volume. If you're referring to an engine's power output, you typically need the engine's efficiency and specific power characteristics to make a conversion. For example, a rough estimate is that approximately 1 kW is equivalent to about 1.36 cc for a gasoline engine, but this can vary widely based on the engine design. Therefore, 4.8 kW could be roughly estimated to correspond to around 6.5 cc per kW, leading to an approximate volume of around 32 cc, but this is highly variable and context-dependent.
No, 250 joules is not the same as 2.45 kW. Joules measure energy, while kilowatts (kW) measure power, which is the rate at which energy is used or produced. To convert between them, you need to consider the time duration over which the energy is used. For example, 2.45 kW means 2.45 kilojoules per second, so you would need to specify a time to make a proper comparison.
To convert cents per kilowatt-hour (kWh) to dollars per megawatt (MW), you can use the following conversion factors: 1 MW equals 1,000 kW and 1 dollar equals 100 cents. Therefore, to convert cents per kWh to dollars per MW, you multiply the value in cents by 10. For example, if the rate is 10 cents per kWh, it would be equivalent to $100 per MW.
To convert cfm (cubic feet per minute) to kW (kilowatts), you first need to know the efficiency of the system. Once you have the efficiency, you can use this formula: kW = (cfm x pressure x efficiency) / 229. upheld wp-admin css where pressure is in psi.
kW x 1,000 = watts
To convert kilowatts (kW) to British Thermal Units (BTU), you can use the conversion factor 1 kW = 3412 BTU/hr. Therefore, a 5 kW heater would produce 5 kW * 3412 BTU/hr = 17060 BTU per hour.
Multiply by Amps.
(1.08W/cm2)(10-3kW/W)(104cm2/m2)=10.8W/m2.
One MegaWatt is 1,000,000 Watts and one KiloWatt is 1,000 Watts. To convert MW to KW just multiply by 1,000. Answer is 20,000 KW
1 ton refrigerant= 3.5 kW
Kw x 3412 / 10000 = gpm I think
899
if power consumption is 130 KW. how can it convert into unit per hour.
1 RT (TONS REFRIGERANT EFFECT) = 3.516 kW