Divide length by 3 (convert feet into yards), divide width by 3 (convert feet into yards) and multiply the results.
or
Multiply length (in feet) by width (in feet) to the area (in sq feet) and divide by 9 (convert sq feet to sq yards).
Linear yards only takes into account the length, square yards is the length multiplied by the width. You could arrive at an answer by calculating the square root of 2500 which is 50
If the area has 56 yards, then the question is defective. "Yard" is a unit of length, not area.If the area is 56 square yards and the length is 8 yards, then the width is 7 yards.
Multiply width by length to get the area. The answer would be 256 square feet or 28.45 square yards.
Multiply width by length to get the area. The answer would be 900 square feet or 100 square yards.
You multiply the width by the length to get the area. In this case the answer would be 240 square feet or 26.67 square yards.
Linear yards only takes into account the length, square yards is the length multiplied by the width. You could arrive at an answer by calculating the square root of 2500 which is 50
Its length is 100 square yards.
Multiply the length of yards by the width of yards. That will give you the square yards.
You cannot convert length nor width to yards. The length and width need t be measured in some units such as inches, feet, miles, metres, etc. You can convert from one unit of length to another using an appropriate conversion factor.
You cannot convert square yards to yards. If you have a real quadratic square with an area of 4800 square yards, then you can calculate one side length as the square root of 4800. The square of 4800 sqare yards has a side length of 69.2820323 yards.
For area measurements, you multiply the length by the width. Here the calculation gives you an answer of 988 square feet. Divide by 9 to get 109.78 square yards.
1,956.538 square meters.
The width is 34/17 = 2 yards
Multiply the length times the width.
If the area has 56 yards, then the question is defective. "Yard" is a unit of length, not area.If the area is 56 square yards and the length is 8 yards, then the width is 7 yards.
Area = Length x Width so... 4 yards x 3 yards = 12 square yards
This conversion would be impossible. As a general rule, converting from like terms to like terms is the only way one unit of measurement can be converted into another form. In the example from the question: Convert 1 yd3 to 1 ft2 Three separate measurements (length, width and height) are to be converted into two separate measurements (length and width, or length and height, or width and height) In each case, there would be a measurement left out from the original unit of measurement (length, width or height, depending on which two were converted). If, however, the question were proposed "How to convert square yards to square feet" or "How to convert cubic yards to cubic feet", then both units of measurement would be the same (i.e. length and width, or length width and height) Because of the ambiguity of the question, the conversion factors for square yards to square feet and cubic yards to cubic feet will be given: Square yards to square feet conversion: 1 yd2 = 9 ft2 Square feet to square yards conversion: 1 ft2 = .111 yd2 Cubic yards to cubic feet conversion: 1 yd3 = 27 ft3 Cubic feet to cubic yards conversion: 1 ft3 = .037037 yd3