You cannot convert length nor width to yards. The length and width need t be measured in some units such as inches, feet, miles, metres, etc. You can convert from one unit of length to another using an appropriate conversion factor.
To convert linear yards to square yards, you need to know the width of the material in yards. Once you have the width, you can multiply the linear yards by the width to get the square yards. The formula to convert linear yards to square yards is: Square Yards = Linear Yards x Width. Make sure to use consistent units for accurate conversion.
To figure the square yardage of a box, first measure the length and width of the box in yards. Then, multiply the length by the width to calculate the area in square yards. If your measurements are in feet, convert them to yards by dividing by 3 before performing the multiplication. The formula is: Area (sq. yd) = Length (yd) × Width (yd).
To find the length of the rectangle, multiply the width by 1.1725. Given the width is 416 yards, the length is calculated as follows: Length = 1.1725 × 416 = 488.4 yards. Therefore, the length of the plot is 488.4 yards.
To find the width, first, convert the length from feet to yards: 24 feet is equal to 8 yards (since 1 yard = 3 feet). The formula for the perimeter of a rectangle is P = 2(length + width). Given that the perimeter is 74 yards, we can set up the equation: 74 = 2(8 + width). Solving for width gives us 74 = 16 + 2(width), so 2(width) = 58, leading to a width of 29 yards.
The width is 7 yards. Area = length x width 56 = 8 x ? 56 = 8 x 7
Divide length by 3 (convert feet into yards), divide width by 3 (convert feet into yards) and multiply the results. or Multiply length (in feet) by width (in feet) to the area (in sq feet) and divide by 9 (convert sq feet to sq yards).
To convert linear yards to square yards, you need to know the width of the material in yards. Once you have the width, you can multiply the linear yards by the width to get the square yards. The formula to convert linear yards to square yards is: Square Yards = Linear Yards x Width. Make sure to use consistent units for accurate conversion.
The length is 200 yards and the width is 48 yards.length + width = 248 yards, and length = (4 x width) + 8 yards.substituting (4 x width) + 8 yards for length,(4 x width) + 8 yards + width = 248 yards;simplifying, width = 240/5 yards = 48 yards;then length = 248 - 48 yards = 200 yards
Linear yards only takes into account the length, square yards is the length multiplied by the width. You could arrive at an answer by calculating the square root of 2500 which is 50
To figure the square yardage of a box, first measure the length and width of the box in yards. Then, multiply the length by the width to calculate the area in square yards. If your measurements are in feet, convert them to yards by dividing by 3 before performing the multiplication. The formula is: Area (sq. yd) = Length (yd) × Width (yd).
To find the length of the rectangle, multiply the width by 1.1725. Given the width is 416 yards, the length is calculated as follows: Length = 1.1725 × 416 = 488.4 yards. Therefore, the length of the plot is 488.4 yards.
To find the width, first, convert the length from feet to yards: 24 feet is equal to 8 yards (since 1 yard = 3 feet). The formula for the perimeter of a rectangle is P = 2(length + width). Given that the perimeter is 74 yards, we can set up the equation: 74 = 2(8 + width). Solving for width gives us 74 = 16 + 2(width), so 2(width) = 58, leading to a width of 29 yards.
Length + width = half of perimeter so width = p/2 - length ie (22-12) 10 yards.
If the area has 56 yards, then the question is defective. "Yard" is a unit of length, not area.If the area is 56 square yards and the length is 8 yards, then the width is 7 yards.
It could be: length 3 yards and width 54 yards, OR length 6 yards and Width 27 yards. All you have to do is think of it this way: If the area is 162 square yards, what two numbers multiplied together equal 162?
To find the area of a rectangle, you multiply its length by its width. In this case, the length is 14 yards and the width is 11 yards. Therefore, the area of the rectangle is 14 yards * 11 yards = 154 square yards.
Area = Length x Width so... 4 yards x 3 yards = 12 square yards