You can't. There are an infinite number of cylinders with different dimensions
that all have the same volume, so the volume alone isn't enough information
to tell you the dimensions.
To calculate density, divide the total mass by the total volume. The result is the density.
there is not enough information to figure this one out, You need the volume (or if you know the elements its made out of , you can figure it out through molar mass)
To know the density you need to know the volume of that object. density = mass divided by volume.
The density is the ratio between mass and volume.
Mass / volume (mass per unit volume) is called "density".Mass / volume (mass per unit volume) is called "density".Mass / volume (mass per unit volume) is called "density".Mass / volume (mass per unit volume) is called "density".
This answer is a lot easier than you thought. I would, however, need proper units in order to give you an appropriate answer. The volume of a cylinder is calculated by multiplying the area of the base by the height of the cylinder, correct? Density is mass divided by volume, thus if you keep mass the same and increase the volume you get a lower density. So because you know the density, and the mass, (provided they are in similar units) D=M/V, where D is density and M is mass, and V is volume. You solve for volume. once you have the volume, you divide it by the height of the cylinder (once again provided the units are the same) to get the area of the base. the area of a circle is (pi)r^2 so divide by pi, and take the square root of the result. Then you multiply that answer by 2, and that is the diameter of the base.
measure the volume of liquid that the object displaces
Yes, provided you know the density of the substance and the substance can be adequately measured by the cylinder. Because density is the quotient of the mass and volume, the mass is the product of the density and volume. So if you multiply the density and volume (assuming the units match), you will find the mass.
Mass is measured by density multiplied by volume. In order to figure out a mass of a rock, one must know its density and its volume measurements.
Density measures how compact a particular substance is. It can be calculated by adding the weight with the volume of the substance. To figure out the density of sugar you must first know the weight and volume and then plug them into the equation: density = weight + volume.
You don't know the density if you only know the mass. You can figure it out if you also know the object's volume.
Suk
The level of the liquid in the cylinder rose by 10 mL when the rock was submerged in the liquid.
Density = (Mass) divided by (Volume) If you know the density and volume, then Mass = (Density) times (Volume)
You will like to know the volume of the mass. Mass / volume will give you density. You can not know the density without mass and volume of the substance.
volume = Mass * density
It is quite simple if it is a regular shaped object like a cylinder or a cube. For example if you wanted calculate the volume of a cylinder you need to know the radius of the circular cross-section of the cylinder - this is the measurement from the centre of the circle, to the outer-edge and then multiply that by the height of the cylinder. For irregular shaped objects don't think there is a simple mathematical way if you don't know the density but you can always use water displacement to get a volume measurement. Just drop the object you want to know the volume off into a graduated cylinder partially filled with water - the amount the level rises will be roughly equal to the volume of the object you dropped in.
density = mass/volume mass = density x volume