Your question is not clear or I am missing something?
The length of the fence (measured around its perimeter) is the circumference and that is your 10 metres.
Then again, a fence that surrounds a tower with a radius of 2 metres (radius measured from the centre of the tower) will have a circumference of:
Pi x 2r = Pi x 4 = 12.566 metres.
Metre to measure its length. Possibly centimetres to measure its height if a garden fence but metres if a security fence.
Dimenisions are required to find the perimeter. And if the perimeter is 20 meters, then you need 20 meters of fence.
Assuming the lot is square, you will need to find the perimeter of the lot. The perimeter is equal to the sum of the length of every side of the figure. In this case, (again, assumed), the figure is a square. This square has two sides of length 44 meters and two sides of length 48 meters. The calculation would be as follows:(44 + 44 + 48 +48) = 184 meters of fencing.If you also needed to find the number of square meters of fencing actually needed to build the fence, you could then multiply 184 (the total length of the perimeter you intend to enclose) by the desired height of the finished fence. Say you wanted a 2-meter-high fence.You could then calculate:184 meters long x 2 meters high = 368 meters^2, or 368 square meters of fencing.
you'll need 112 meters of fencing and it'll cost about $2,380.00 .
12 meters, you said.
Measure the height of the fence and multiply it by the length in meters.
The measurement you need in order to fence a garden is the garden's perimeter. That's a length, and it can be expressed in any length units. For a typical home garden, feet or meters would be most convenient.
Metre to measure its length. Possibly centimetres to measure its height if a garden fence but metres if a security fence.
Dimenisions are required to find the perimeter. And if the perimeter is 20 meters, then you need 20 meters of fence.
8 meters and 4 meters
Assuming the lot is square, you will need to find the perimeter of the lot. The perimeter is equal to the sum of the length of every side of the figure. In this case, (again, assumed), the figure is a square. This square has two sides of length 44 meters and two sides of length 48 meters. The calculation would be as follows:(44 + 44 + 48 +48) = 184 meters of fencing.If you also needed to find the number of square meters of fencing actually needed to build the fence, you could then multiply 184 (the total length of the perimeter you intend to enclose) by the desired height of the finished fence. Say you wanted a 2-meter-high fence.You could then calculate:184 meters long x 2 meters high = 368 meters^2, or 368 square meters of fencing.
you'll need 112 meters of fencing and it'll cost about $2,380.00 .
12 meters, you said.
24 meters, if it stays tight against the outside of the fence
The length of a standard baseball field is approximately 90-95 meters (300-330 feet) from home plate to the outfield fence.
To answer this type of question one simply multiplies the length by the width. * 6.5 x 3 = 19.5 square metres.
Words you can make from the word "circumference" would be: fen fence men rim mince fir