To read a 50th inch ruler, first identify the smallest unit of measurement, which is typically the smallest mark between the inches. Each inch is divided into 50 equal parts, so each mark represents 1/50th of an inch. Count the number of marks from the 0 inch mark to your desired measurement. For precision, ensure you align the object accurately with the ruler for an accurate reading.
You look at the markings on its edge.
To read 4.875 inches on a ruler, first locate the 4-inch mark. Then, move to the next mark, which is the 5-inch mark, and divide the space between these two marks into tenths. Count 7/8 of the way from the 4-inch mark, which is 0.875 inches, placing you at the 4.875-inch mark.
Five eighths of an inch on a ruler would be located between the half-inch mark and the three-quarter inch mark.
you read a ruler by conting the little lines first
where is .39 on a ruler
You look at the markings on its edge.
inch ruler
I assume you mean 0.02 of an inch? i.e. 1/50th of an inch. So there are 25.4mm in an inch. We have to divide this by 50 to get a 50th, which is 0.508mm.
an inch ruler is 2.5cm and a cm is the same but smaller.....saichona
The answer depends on the measurement units used for 8.3
That depends on the ruler. If you refer to a 1 foot ruler, divided in inches and sub-inch divisions, then 0.39 inch is a more than a quarter inch, and less than a half inch.
To read 4.875 inches on a ruler, first locate the 4-inch mark. Then, move to the next mark, which is the 5-inch mark, and divide the space between these two marks into tenths. Count 7/8 of the way from the 4-inch mark, which is 0.875 inches, placing you at the 4.875-inch mark.
Five eighths of an inch on a ruler would be located between the half-inch mark and the three-quarter inch mark.
you read a ruler by conting the little lines first
with a ruler
where is .39 on a ruler
It depends on your ruler and what units are on your ruler. To measure to the nearest inch just find the inch measurement and round up or down to get to the nearest inch in your measurement is between two whole numbers.