It is an obtuse triangle
The complement to an angle is how much it takes to make 90 degrees. The complement to 30 degrees is 60 degrees. The complement to 45 degrees is 45 degrees.
Elbow is a fitting used to change pipe direction, 45 degrees in this case, LR is referred as "long Radius" ( normally most pipes, unless you ask for SR, short radius). Butt weld refers to welding 2 ends from two separate fittings or pipe. Both ends are beveled (30 degrees is tapered from inside pipe diameter to outside pipe diameter on pipe/fitting connections)
You find the center of a screwed 45 degree elbow by bisecting the angle.
They are: 90 degrees, 45 degrees and 45 degrees
30
At each vertex, the mitre needs to turn the trim through 45 degrees. Therefore, at each mitre the outer edge of the trim must be 22.5 degrees (a quarter of a right angle) further out.
about 34.6 miles
the northwest
No, elbow 135 degree and elbow 45 degree are different from each other.
It is an obtuse triangle
What is the Dfference between 5d 45 DEG elbow and 10d 45DEG elbow?
A point 30 degrees north and 45 degrees east is in the Atlantic Ocean. It is about equidistant between Europe and the United States several hundred miles south of the Azores.
The complement to an angle is how much it takes to make 90 degrees. The complement to 30 degrees is 60 degrees. The complement to 45 degrees is 45 degrees.
Elbow is a fitting used to change pipe direction, 45 degrees in this case, LR is referred as "long Radius" ( normally most pipes, unless you ask for SR, short radius). Butt weld refers to welding 2 ends from two separate fittings or pipe. Both ends are beveled (30 degrees is tapered from inside pipe diameter to outside pipe diameter on pipe/fitting connections)
You find the center of a screwed 45 degree elbow by bisecting the angle.
30-45 degrees north and south of the equator