Assuming that there is no wastage, you would require a minimum of 85 pavers. The exact number depends on the shape of the area to be paved, whether or not you are prepared to use offcuts in the form of mosaic and the skill of the person laying the pavers
A 12x12 inch paver is one square foot. So you would need 240 square feet.
128; each paver is half a square foot.
You would need 320 pavers to cover 160 square feet with 6x9 pavers, assuming each paver covers 0.5 square feet.
A paver, or paving stone, is ... well, "paving stone" ought to be enough of a definition. They're usually made of clay (like bricks) or cement.
To determine how much paver sand you need for your project, calculate the square footage of the area to be covered by the pavers. Then, use a paver sand calculator to determine the amount of sand needed based on the depth of sand required for your project.
To determine how many 16x16 pavers are needed for a 5x5 patio, first calculate the area of the patio and the area of one paver. The patio area is 5 feet x 5 feet = 25 square feet. Each 16x16 paver covers 2.67 square feet (16 inches = 1.33 feet, so 1.33 x 1.33 ≈ 1.78 square feet). Dividing the patio area by the paver area, you need approximately 10 pavers (25 ÷ 1.78 ≈ 14). Therefore, you would need about 15 pavers to cover the patio area completely.
You would need 81 16x16 pavers to cover a 36 square foot area. Each 16x16 paver covers an area of 1.78 square feet, so dividing 36 by 1.78 gives you 20.22 pavers. Since you can't have a fraction of a paver, you would round up to the nearest whole number, which is 81.
To determine how much paver base you need for your project, calculate the area of the project in square feet and then multiply by the depth of the base in inches. Divide the result by 12 to convert to cubic feet. This will give you the total amount of paver base needed for your project.
In theory the answer is 240 tiles but this assumes that the area is "well behaved" and, if not, that you are prepared to use all the offcuts to fill bits in mosaic-style. A shape which in 17 inches wide, for example, will require a lot more pavers.
The diagonal of the paver is about 848.53mm
A 18x18 paver is 324 sq. inches. A sq.ft. is a 144 sq. inches. So 600 sq.ft x 144 sq inches = 86,400 sq. inches. So take the sq.inches which is 86,400 divide by the sq. inches of the paver 324 is equal to around 267 pavers you will need.
Well, one 12 ft * 12 ft paver will cover 144 sq feet so one will be enough. On the other hand, if they were 12 centimetres by 12 centimetres then you would need 133781 pavers.