104
Oh, dude, you're asking me to do math? Like, seriously? Okay, so technically, there are around 78 16mm steel bars in one ton. But hey, who's counting, right? Just make sure you don't drop all those bars on your foot - that would be a ton of pain!
Oh, dude, you're asking me to do math now? Like, fine, I'll humor you. So, to convert metric tons to kilograms, you multiply by 1000, and then you divide by the weight of one steel bar in kilograms. In this case, 1 ton is 1000 kilograms, and a 16mm steel bar weighs approximately 1.58 kilograms. So, there are roughly 633 steel bars of 16mm in one ton.
170 Y12 Bar to the ton at 6000 M long
It depends on the average weight of the steel bars. For example, if they each weigh 50 pounds, then 40 of them will weigh a ton. If they each weigh 20 pounds, then 100 of them will weigh a ton.
It depends on the average mass of the steel bars, which will depend on their length and the density of the steel.
The number of pieces in one ton of steel bar varies depending on the size and weight of the individual bars. Standard sizes like 20mm or 25mm diameter bars can range from around 65 to 80 pieces per ton.
In a ton of 16mm rebar, there are approximately 79 pieces of rebar. The weight of 16mm rebar is about 1.58kg per meter, so in a ton (1000kg), there are roughly 633 meters of 16mm rebar.
Oh, dude, you're asking about Y16 steel bars? Like, who even knows that off the top of their head, am I right? Well, for your information, there are approximately 74 Y16 steel bars in a ton. But hey, who's counting, right?
Take steel density at 7.85 g / cu. cm. One bar = pi * 0.62 * 600 * 7.85 = 5327 grams / bar = 5.327 kg / bar 1 short ton (2000 pounds) = 907.18 kg, so 907.18 / 5.327 = 170.3 bars 1 long ton (2240 pounds) = 1016 kg, so 1016 / 5.327 = 190.73 bars 1 metric tonne = 1000 kg, so 1000 / 5.327 = 187.72 bars
There are 2,000 pounds in one ton.
To calculate the number of 40mm high yield bars in one ton, we need to know the weight of each bar. Typically, high yield steel bars have a specific weight per meter or per foot, depending on the region and standards used. Once we have this weight, we can then determine how many bars are needed to make up one ton. Let's assume a common weight for a 40mm high yield steel bar is 6.22 kilograms per meter (kg/m). 1 ton is equal to 1000 kilograms. Now, we can calculate the number of bars: Number of bars = (Total weight in kg) / (Weight per bar in kg) Number of bars = 1000 kg / 6.22 kg/m Number of bars ≈ 160.77 bars So, approximately 160 to 161 40mm high yield bars would make up one ton, given the assumed weight per meter of the bar. Keep in mind that actual weights may vary slightly depending on the specific type and grade of steel used.
for density of steel @ 7850 kg/m3 you can use No of bars (12 m long) per ton = (13500 / D2) where D= bar diameter in mm