This depends on how many wires you need to put through the conduit. Typically you would figure out what size wire you need to handle a given load, and then find the smallest conduit you could possibly put those wires in. I'd actually need to know what type of conduit, also. Size your wire first, then your conduit. If you don't know how to size your wire, call an electrician. If you do it wrong you will start a fire. Once you've got your wire size, NEC Table C1 for EMT or C2 for PVC should head you in the right direction. ----If you do not understand the work well enough to accomplish it yourself properly and safely, don't try it. Consult a professional electrician, as they are proficient enough to do it properly and safely. When working on electrical circuits and equipment, make sure to de-energize the circuit you will be working on. Then test the circuit with a definitive means to make sure it is off (multimeter with metal tipped leads, voltage tester with metal tipped leads, etc., not a non-contact tester, which is non-definitive.)
If 16mm is the overall diameter of the cable, yes - If that's the diameter of one core, then no.
The offset is the preset distance that is marked on the shoe of the bender. This preset mark allows for shrink back when bending. It allows you to make a perfect bend if a conduit run comes to a wall and has to go up the wall. It takes into account the outside diameter of the conduit and adds it to the shrink back of the bend to make the conduit fit exactly up against the 90 degree angle of the wall.See Sources and Related links below.
Installing a wall scone with an electric light can be an easy process. First the power must be turned off to prevent electric shock. Then a hole should be cut to fit the fixture and expose the wires. Match up the correct wires to the light then place the sconce in the wall. Secure the sconce with glue or nails and test the light connections.
7 , nah im kidding, what sorta question is that lol
30 pairs
10
16 current carry conductors
The simple answer to your question is yes. But there are limits to how many wires can be in any conduit, and the current carrying capacity of the conductors can be affected by distance, ambient temperature, and how many conductors are contained in the same conduit. Other things to consider are, Can you physically fit the wires in there? Would it be easier to run a new conduit? Do you have the manpower necessary to get the work done?
According to appendix C of the NEC, 3 #2 awg are permitted in a 1" EMT.
9 - Is this a test answer or do you just want to know for a project you're doing? Take a look at NEC chapter 9 - tables 4 and 5 (in the 2005 edition at least)
11
9-10, but the conduit may not exceed a certain length, or a certain voltage in order for you to "legally" do it. Many applications allow for conduit fill ratio's that exceed the standards of the NEC ( National Electrical Code) and most of them are short (less than 24") "chases" between control devices mounted in listed Junction boxes for that purpose. It is not advisable to fill a conduit more than the NEC allows for purposes of heat dissipation.
no
This depends on how many wires you need to put through the conduit. Typically you would figure out what size wire you need to handle a given load, and then find the smallest conduit you could possibly put those wires in. I'd actually need to know what type of conduit, also. Size your wire first, then your conduit. If you don't know how to size your wire, call an electrician. If you do it wrong you will start a fire. Once you've got your wire size, NEC Table C1 for EMT or C2 for PVC should head you in the right direction. ----If you do not understand the work well enough to accomplish it yourself properly and safely, don't try it. Consult a professional electrician, as they are proficient enough to do it properly and safely. When working on electrical circuits and equipment, make sure to de-energize the circuit you will be working on. Then test the circuit with a definitive means to make sure it is off (multimeter with metal tipped leads, voltage tester with metal tipped leads, etc., not a non-contact tester, which is non-definitive.)
If 16mm is the overall diameter of the cable, yes - If that's the diameter of one core, then no.
RJ-11 is the standard connector utilized on 2-pair (4-wire) telephone wiring