0
Do you mean "How many 90 degree bends are allowed in a 100ft pipe?"? If that's what you mean, the answer depends on
- the diameter of the pipe
- what the pipe is made of
- what the pipe is for (fresh water, drain water, sewage, natural gas...)
- local regulations
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you find out the lenght of a piece of a pipe on a 45 degree angle?
Can you measure the distance from the corner to either end of the pipe ? The length of the pipe is (1.414) times that distance.
How do you get the take off 90 degree elbow pipe?
Measure to the center of the Ell and decuct for the threads ..
How do you calculate the center of a 90 degree pipe elbow?
If your elbow is a short radius it is 1 times your nominal pipe diameter. If it is a long radius it is 1 1/2 times your nominal pipe diameter.show me the exact pattern of long radius
A piece of pipe is 303.4 inches long If five pieces each 41.3 inches long are cut from the pipe how many inches of pipe remain?
A piece of pipe is 303/4 inches long. If five pieces, each 41/3 inches long, are cut from the pipe, how many inches of pipe remain?
How many gallons in a 3 inch pipe?
0.3672 gallon per foot of pipe.
Degree of a bevel for pipe?
37 degree
What is the take off formula off 45 degree elbow pipe?
The take off formula of a 45 degree elbow pipe, will depend on what the pipe is on. Sometimes a 45 degree pipe will need a 90 degree right angle turn to come off.
Another name for a right angled pipe?
90 degree angle pipe
What is the pipe fitting formula for a 22.5 degree?
Pipe size times 0.707
What is the cut off measurement of a 90 degree pipe fitting?
pipe size(inch)x38.1
How do you find out the lenght of a piece of a pipe on a 45 degree angle?
Can you measure the distance from the corner to either end of the pipe ? The length of the pipe is (1.414) times that distance.
how do weld GI pipe to GI pipe?
A GI pipe is welded to a GI pipe by using solder and flux. The pipe is heated up, flux applied, and then solder allowed to flow into the joints to create a secure bond.
What is the formula 45 degree elbow?
15.875 x pipe size=
Are you allowed to hang anything from a sprinkler system pipe?
NO, NFPA 25chapter 5, sprinkler pipe shall be free of external load
What does a ninety degree angle of three quarter inch copper pipe equal in length of pipe?
It equals 3/4" in length.
How many space heaters to keep pipes from freezing?
No space heaters ! -Much cheaper to put electric pipe warmers on the pipe, they only come on when temp drops below 1 degree, and cost about 1$ a foot.
How much more pressure does it take to push water up a vertical pipe than if the pipe is on a 45 degree angle?
it takes the same pressure if the vertical heights the same but since the 45 degree pipe would be longer it would create more flow restriction.
