0
What else can I help you with?
What is the rating of circuit breaker needed for a 500kva load?
To answer this question a voltage needs to be stated and whether the load is three phase or single phase. Without the voltage the amperage can not be calculated. For single phase, Amps = kva x 1000/voltage, for three phase, Amps = kva x 1000/1.73 x voltage.
Can you run 1000 watt light and ballast with an overhead 60 watt light and a floor fan on a 15 amp breaker?
Yes, if that is all that is on the circuit.
Can you run a 1000 watts light bulb with a 20 amp breaker 120v?
Yes, considering you can do that on 15 amp breaker easy.Experience in construction field. The worst that will happen is that the breaker will trip off after a few minutes.In the formula W = A x V. W = 20 x 120 = 2400 watts. If you want you can operate two 1000 watt lamps from a 20 amp breaker operating on 120 volts.
What is the voltage of a geyser?
1000
How much power does this unit consume?
an 1100 watt microwave wil generaly consume aproximatly 3.0 wats when not in use and close to 1100 watts while in use, the internal light while the door is opn will consume about 32.4 watts. There are 1000 whats in a Kilowatt hour.
How many kilowatts does a light bulb use?
Thsi depends on the light bulb specification. For example if you buy a standard 60W light bulb from your supmarket then this will consume 0.06kilowatts. Its simple just divide the wattage stated on the light bulb by 1000 to give you the kilowatts
What is medium and high voltage?
Medium voltage is over 1000 v, high voltage is over 45 kV.
Can you run a 60 watt light bulb on a 300 volt wire?
If your light bulb voltage rating is under 300 volts then yes it can use 300 volt wire. The voltage rating of the wire is the maximum voltage that the wire can safely carry. The three common insulation groups is 300 volts, 600 volts and 1000 volts.
1000 watts rms consume how many kw?
"Watts RMS" is better represented as "Watts average". Since 1000 watts is 1kw you have "1000 watts average" and you can derive "1Kw average". So 1000 watts RMS will consume 1 Kw
What is breaker size for 62.19 KW 3 phase?
A breaker protects the wire size of the feeder that is connected to it. The amperage of the load must be found. Without a voltage stated the amperage from the wattage given can not be calculated. The equation for amperage when the kw is given is A = kW x 1000/1.73 x volts x pf. The pf constant to use is .9.
Convert 1000 ohms to amps?
Can not do it without knowing the voltage I = E/R. Amps = Voltage/Ohms.
What is the acceptable value of contact resistance for circuit breaker in service?
A low voltage (less than 1000 VAC) circuit breaker for 15 A typically has a contact resistance of 0.01 Ohm or less.
