Want this question answered?
I think you mean 6 inches thick, not 6 feet thick. You would need 200 cubic feet, or 7.4 cubic yards.
It depends on the thickness of slab. A yard of cement contains 9 cubic feet. Thus, it would cover 9 square feet if the slab was 1 foot thick. For a 4 inch thick slab, it would cover 3 times as much area, or 27 square feet.
I would guess about 70-80 bales
Gravel is bought in cubic quantities, or by weight. You ask "to fill" but you only give a square measure. The volume of gravel required wil depends on the depth you wish the gravel to be. To fill 81 square metres to a depth of 5 cm would require 4.05 cubic metres of material.
A yard of concrete is a cubic yard and cannot be converted directly to square feet of coverage. You must first determine the depth or thickness that the concrete will be. For instance, since 1 cubic yard equals 27 cubic feet, a 1 foot thick layer of concrete will cover 9 square yards of area. A 4 inch (1/3 foot) thick layer would cover 27 square feet of area.
It would take roughly 66 bags to cover a 200 square ft area 2 inches thick
It would depend on how thick you want to spread it.
First, find the total square footage of your driveway. You can find this by multiplying the length of the driveway by the width of the driveway. When you have determined the square footage, you need to decide how thick you will apply the gravel. At a depth of 1", 1 cubic yard of gravel will cover 320 square feet. So for example, if you would like to put down 3 inches of material over 1000 square feet, you would do the following. 1000 square ft./320 = 3.125 3.125*3" depth = 9.375 yards
I think you mean 6 inches thick, not 6 feet thick. You would need 200 cubic feet, or 7.4 cubic yards.
You would need about 5 cubic yards. Gravel is usually sold by the ton. I do not know that conversion. Who ever would deliver it for you should be able to help. If I were using crushed concrete I would use 15 tons... but I can not spread it 1" thick either.
1 cubic yard covers 324 square feet per inch of thickness, divide 324 by thickness in inches to get coverage, i.e. 4 inches thick would cover 324/4=81 square feet, 36 inches thick would cover (you guessed it) 9 square feet.
It depends on the thickness of slab. A yard of cement contains 9 cubic feet. Thus, it would cover 9 square feet if the slab was 1 foot thick. For a 4 inch thick slab, it would cover 3 times as much area, or 27 square feet.
It would obviously depend on how thickly you wanted to cover the surface, and how 'tall' a single unit of pea gravel was. You would need 736 bags per foot depth.
I would guess about 70-80 bales
It depends on the thickness and the density. One ton should be about 15 cubic feet when compacted, so it would cover 30 square feet 6 inches thick or 45 square feet 4 inches thick or 60 square feet 3 inches thick. It would make a driveway four inches thick, 9 feet wide and 5 feet long or a footpath 3 inches thick, three feet wide and 20 feet long.
Three square feet would cover one square yard or 36 square inches.
You would need about 13 cu yards or about 15 tons.