im not sure you should ask your math teacher
circumference in feet = (diameter) X 3.142857; roughly 95 linear feet
Assumption: 6 x 6 is using inches as the unit (half a foot) and a 4 foot board means 4 square feet of board. Each square foot of board can be cut into four half foot x half foot pieces. Therefore, the 4 foot board would be able to make 16 half foot x half foot (6 inch x 6 inch) blocks.
13 feet are in 4 yards and a foot
Four feet. 12 inches in a foot.
Four feet.
If this is for flooring linear feet may be established with just the length of 15' x 4". If flooring is being sold by the linear foot the width will already be established by the flooring you choose. Most come on a roll that is 10-12 feet wide. If it is the parameter measurement that is needed, just add the four sides. It is not a bad idea to just round inches up to feet and add.(16+16+9+9= 50') Feet can be converted to inches by multiplying by 12 and then adding the four sides. Feet would then be found by divided that answer by 12. The answer will be about 48 feet.
16.7 feet
About 1.2 meters per four feet.
Almost five; 4.95
Yes, but you need to check that te thickness of the ply is sufficient for any load that it may have to bear.
No. Four feet equals 48 inches. There are 12 inches for every foot.
it means seven feet and four inches...........i think:]