0
What else can I help you with?
How many BTU's does it take to hear a 500 sq ft room?
To heat a 500 sq ft room, you generally need about 20 to 30 BTUs per square foot, depending on factors like insulation, ceiling height, and climate. This means you would require approximately 10,000 to 15,000 BTUs to effectively heat the room. It's important to assess specific conditions to determine the exact BTU requirement for optimal heating.
How many sq. ft. will a 60000 output furnace heat?
The heating capacity of a furnace is typically measured in BTUs (British Thermal Units), not square feet. However, a general rule of thumb is that one BTU can heat about 1 square foot of space per degree of temperature difference between the inside and outside. A 60,000 BTU furnace can effectively heat approximately 2,000 to 3,000 square feet, depending on factors such as insulation, ceiling height, and climate. Always consult with a heating professional for accurate assessments based on specific conditions.
How many btus of heat are removed per hour when the water at a flow rate of 10 lbs per minute is cooled 15 degrees?
To calculate the BTUs removed per hour, you can use the formula: BTUs = flow rate (lbs/min) × temperature change (°F) × 1. If the flow rate is 10 lbs/min and the temperature change is 15°F, the calculation is: 10 lbs/min × 15°F × 1 BTU/lb°F = 150 BTUs/min. To find the hourly rate, multiply by 60 minutes, resulting in 9,000 BTUs per hour.
How meany btu does it take to heat a 10000 sq ft room?
It will take 300000 btus at 12000 a ton and a ton of air will be 400 sq feet so. 10000 sq ft divided by 400 is 25 tons of air then multiply 25 times 12000 btus and you get 300000
How many BTUs will it take to change 1 gallon of water at 32 degrees to ice at 32 degrees?
You would need to remove approximately 1200 BTUs of heat to convert a gallon of water to ice. There are 8.34 lb in a gallon of water, which converting to lb-moles is 0.463. The latent heat of crystallization for water is -2583.4 BTU/lb-mole. Multiplying the two together and you get -1197 BTUs, which means you need to remove that amount of heat to convert the gallon of water to ice.
How many BTUs to heat a 500 square foot house?
about 12,000
How many btus are needed to heat a sixty square foot room?
The number of BTUs needed to heat a room can vary based on factors like insulation, ceiling height, climate, etc. As a rough estimate, you can use the formula: 20 BTUs per square foot for a room with standard ceiling height. Therefore, for a 60 square foot room, you would need around 1,200 BTUs to heat it effectively.
How many btu to heat a 800 square foot home?
30000 btus for every 400 square ft
How many btu's to heat 800 square foot home?
30000 btus for every 400 square ft
How many square feet does 4800 btus heat?
4800 BTUs will 150 square feet.
How many btu to heat 1600 sf?
On average it takes about 1,600 BTUs to heat 50 square feet. Multiplying 50 by 1600 equals about 80,000. Therefore, the heating plan of 1,600 square foot are would take about 80,000 BTUs.
How many square feet will 26000 btus heat?
how many square feet will 26,000.00 heat
How many BTUs are needed to heat a 1150 square foot home?
to calulate your btu needs,you can use this link: http://hearth.com/calc/btucalc.html
How many btu to heat 1000 square feet?
It takes about 50,000 btus to heat 1000 square feet
How many btu is needed to heat a 600 sqft room?
The amount of BTUs needed to heat a room depends on various factors such as insulation, ceiling height, climate, and desired temperature. As a rough estimate, for a moderately insulated room with an 8-foot ceiling in a cold climate, you would need around 20-25 BTUs per square foot. So for a 600 sqft room, you would need approximately 12,000-15,000 BTUs to heat it effectively.
How many BTUs is needed to heat to 70 degrees?
The number of BTUs needed to heat a space to 70 degrees will depend on factors such as the size of the space, insulation levels, outdoor temperature, and efficiency of the heating system. A general estimate is around 25-30 BTUs per square foot. It is recommended to consult a heating professional for a more accurate calculation.
How many btu's are required for an 1800 square feet ranch house in KY?
The number of BTUs required to heat a house depends on factors like insulation, climate, and efficiency of the heating system. As a general guideline, a ranch house in Kentucky with good insulation may require around 30-40 BTUs per square foot. Therefore, for an 1800 square foot house, you might need approximately 54,000 to 72,000 BTUs. It's recommended to consult with a heating professional for a more accurate assessment.
