About 0.075 lbs. Caculated using the ideal gas law: PV=nRT. Assuming the T=68F (528R) and P=1atm with the MW of air approx. 28.8 lb/lb-mole. The gas constant R, using these units is 0.7302. Rearranging the formula to give: mass = MW*(PV/RT) Hope this helps.
If measured at sea level it's 25,401.6 lbs per square foot. That is using the number of square inches in a cube 1,728.
At normal sea-level air pressure, about 13.15 cubic feet per pound of air.
14.6
14.
It depends on what gas, at what pressure, etc.
One liter is 1 cubic decimetre.
9.54
That depends on what substance you fill those cubic feet with. -- If you fill them with air, they can't hold even one pound. -- If you fill them with water, they can hold almost 219 pounds. -- If you fill them with concrete, gold, or stones, they can hold even more pounds.
There is no sensible answer to this question. A pound per square inch is a measure of pressure, with dimensions [ML-2]. A pound per cubic foot is a measure of density, with dimensions [ML-3]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information.
7.854 cubic feet.
A liter is always a cubic measurement, so that adjective in unnecessary. 0.197 liters are 0.006956989344 cubic feet, no matter what you are measuring.
Air has a specific volume (cubic feet per pound) of approximately 13.8 (cubic feet per pound) at 78 degrees F and 50% relative humidity. The specific volume ranges from about 12.4 cubic feet per pound at 31 degrees F and 50% relative humidity to about 14.8 cubic feet per pound at 105 degrees F and 50% relative humidity. The specific volume varies as a function of temperature and humidity. ------------------------------------------------ The correct term is mass not weight. According to the International Standard Atmosphere at 15 oC and 760 mm col. Hg the density of pure, dry air is 1,225 kg/m3. So, a cubic foot has a mass of 34,7 g. For other conditions it is of course necessary to know the characteristics of air in the specified location and time.
It depends on what gas, at what pressure, etc.
None. A pound is a measure of mass while a cubic foot is a measure of volume. The two measure different things and it makes no sense at all to try to convert from one to the other. You could easily lift 16 cubic feet of air using 1 hand but 16 cubic feet of lead is quite another matter!
there are 27 cubic feet in a cubic yard hence 420 divide by 27 equals 15.55555
One liter is 1 cubic decimetre.
required air is approx 12 cubic feet of air per cubic feet of natural gas fro propane it will be approx 19 cubic feet of air
9.54
None. A pound is a measure of mass. A cubic foot is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid. If you are not convinced, consider a cubic foot of air. How many pounds? Next consider a cubic foot of lead. How many pounds ?
1600 cfm
That depends on what substance you fill those cubic feet with. -- If you fill them with air, they can't hold even one pound. -- If you fill them with water, they can hold almost 219 pounds. -- If you fill them with concrete, gold, or stones, they can hold even more pounds.