0
A ton is a measure of mass. A cubic foot is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
If you are not convinced, consider 40 cubic feet of air. How many tons? Next consider 40 cubic feet of lead. How many tons?
A 100 cubic feet of what? The mass of a 100 cubic feet of air would be substantially different from the same volume of lead, for example.
Add your answer:
Earn +20 pts
How many cubic feet are in 1 ton of soil?
At 100 pounds per cubic foot, that is 20 cubic feet per ton = 0.57 cubic meters
How many cubic feet of gravel equal 1 ton of gravel?
Knowing that 1 cubic foot is pretty much equal to 100 pounds or 0.05 ton, 1 ton of gravel is around 20 cubic feet.
How many cubic feet of granite make one ton granite?
One ton of granite is equivalent to approximately 36 cubic feet.
How many cubic feet are in a ton of black stone boulder?
about 6 cubic feet
How many cubic feet of aggregate 1 ton?
I
How many cubic feet of dirt in a ton?
On average, there are about 0.83 cubic yards of dirt in a ton, which is equivalent to roughly 22 cubic feet. This can vary depending on the density of the dirt and how tightly it is packed.
How many cubic feet are in 2.13 ton?
There are approximately 42.6 cubic feet in 2.13 tons. This conversion is based on the fact that 1 ton is equivalent to 20 cubic feet.
How many cubic yards of road bond are in 1 ton?
5 cubic feet
How many cubic feet are in a ton of wood pellets?
About 50
How many cubic feet in one ton of m sand?
It depends on the density of the M sand. Assuming the density is around 100 lbs per cubic foot, one ton of M sand would be roughly 20 cubic feet.
How many 100 Liters in 1 Cubic ton?
1 cubic metre = 1000 litres
How do you calculate the amount of sand needed to cover 100 square feet 2 inches deep?
Sand is usually sold by the ton so if you find the amount needed by 100 x 1/6 this will give you your cubic foot total. Then you will divide by 27 which is the number of cubic feet in a cubic yard. You should have 16 cubic feet at these measurements. 16 divided by 27 is .59 or a little over half a cubic yard. There are 22 cubic feet of sand per ton so 1 ton of sand should do it. So if the sand in your area is sold by the ton then get 1 ton. If it sold by the yard get 3/4 yard if you can. Hope this helps.
