Area of each board = 8*0.145 = 1.16 metres2.
Area to be covered = 7*7 = 49 metres2.
Number of boards required = Roundup(49/1.16) = Roundup(42.2) = 43.
This assumes that all offcuts are used. That may not be possible if any of the offcuts are shorter than the distance between the supporting joists.
Add the height of the pool to the 15' width of the pool. Then add the width of the deck to the 24' length of the pool to obtain the right measurement.
As a linear meter is a length with zero width, even with an infinite number of them they will not cover an area of 30 square meters.
7 sq meters
cover meters
The Louvre is approximately 60,600 square meters.
The area of a rectangular deck is found by multiplying it's width and length. In this case, a 5.4 by 4 meter deck would require 21.6 square meters of material to cover. ------ The above is true but you asked about how many linear meters of decking you would need to cover this area. To answer this you would need to give us width dimension of the decking planks that you were thinking of using.
How many 1x6x12 deck boards to cover 800 sq.ft
Cedar is a popular type of tree, commonly used in flooring, and sometimes furniture. Cedar decking is used to cover ground that is exposed to the weather, as it offers a great look, and is resistant to weathering.
80 boards.
If a single roll of wallpaper will cover three square meters it will take 3.1 rolls to cover a wall that is 2 meters x 5 meters. You will need 10 square meters of paper to cover this size wall.
You can't convert meters to square meters.
Add the height of the pool to the 15' width of the pool. Then add the width of the deck to the 24' length of the pool to obtain the right measurement.
Depending on your covering needs there are basically two options. 1) Safety Cover needed? The only way to cover a pool this way is to have a custom Safety Cover made. It requires A/B measurements and is anchored with brass anchors in decking or lawn tubes in other types of decking. 2) Winter cover to keep leaves and debris out of pool? You'll need to find a rectangle cover that is large enough to cover the pool. Use water tubes to fully encircle the perimeter of the pool to ensure that wind doesn't get under the cover. Roll or fold up the excess cover and weigh it down with the water tubes.
The boards are 2"x6"x 16 ft. Since each board is 0.5 ft wide and 16 ft long, it will cover 8 sq ft. 400/8 = 50, so you will need 50 boards.
7*4 =28 square foot boards 192/28 = 6.857142857142857 = 7 boards
As a linear meter is a length with zero width, even with an infinite number of them they will not cover an area of 30 square meters.
18