This is a kind of trick question.
In a closed static system containing fluid, pressure is equal everywhere. This is called the Law of Pascal.
One can use this principle to lift a car with a finger. Fill a tank with water and have a car float on a platform. Now make a hole in the tank and connect a tube to it. By preventing the tube to leak, you have to apply a certain pressure, which may be smaller than 1 bar. If you increase the pressure, either by hand or possibly by blowing the tube, you can lift the car. Not so much with a short tube, but more with a long tube. The higher pressure in the tube will push the water back in the tank and cause the water in the tank to rise with the car on top of it.
Bar is a unit used to measure pressure, one bar is the normal atmospheric pressure of the on the surface of the earth, and ten bar is when the pressure is ten times the normal atmospheric pressure on the surface of the earth.
how many steel bar in one ton
Assuming you need a metric ton, that's 1000 kilograms. To lift that, you need a FORCE of 9800 newtons. Force is related to pressure by: pressure = force / area, so the answer to the original question would depend, over what area the force is applied.
carnage can lift 50tons and 2tons is the strength of a car so just imagin how many cars carnage could lift in one hand carnage can lift 50tones and venom can lift 80tons so imagin how many cars venom and carnage could lift in one hand
"Because the pressure will cause the heart to explode." Well, no (the heart cannot "explode" anyways, rupture yes, but I'll leave it at that for now). The main problem is the pressure differential on the surface compaired to the lungs which are submerged. At one meter's depth the water adds 0,1 bar of pressure to the atmospheres 1 bar. This means that the lungs which are compressed to 1,1 bar (1 bar ATM and 0,1 bar of water) must overcome the pressure, making breathing impossible since the air cannot be drawn into the lungs.
Rounded up to 15
Bar is a unit used to measure pressure, one bar is the normal atmospheric pressure of the on the surface of the earth, and ten bar is when the pressure is ten times the normal atmospheric pressure on the surface of the earth.
there is not one a torsion bar suspension is a cheap lift. i have one on my truck and i am currently looking into a suspension lift for mine. i suggest you do the same.
Not. Ton is a unit of mass and bar a unit of pressure - one does not translate to the other.
Atmospheric pressure is approximately equal to 14.7 pounds per square inch One bar is equal to one atmosphere
A hydraulic lift works by having pressure travel through a tube into another. One tube is smaller forcing air into the larger one in order to push and raise the lift.
Assuming you are at sea level, the pressure will be about one atmosphere - or about one bar. (The pressure is the same for any area.)
PSI and Bar are units of pressure. PSI is pounds per square inch. The conversion rate between the two is one bar is equal to 14.5038 PSI. Bar is a non-SI measurement of pressure.
It means the makers claim it is waterproof to 10 bar pressure. One bar is normal atmospheric pressure, about 14.7 psi, so it should withstand 10 times normal pressure. A depth of approximately 330 feet.
There is no direct relationship, bar is a unit of pressure, Newton is a unit of force. You may mean Nm^-2 (Newtons per metre squared), in that case 1 bar = 100000 Nm^-2
Newton
One bar = 100 kPa