50 of anything is normally smaller than 62.5 of the same thing.
The answer depends on the material and thickness of the wire.
It is 50/254 which can be simplified to 25/127.
how thick is the paper? example-1mm thick paper (1x2x2x2x2x2x2x2 ect. till youve multiplied 50 times and that equals the thickness in millimeters, all you have to do them is convert the millimeters into miles
residential - 40' ceiling height means approx. 45'/story because of joist thickness. commercial - 50'/story, but that's a wild guess Source: How many feet in one story
ANSWERIn the case of polythene, gauge can be converted to thickness by dividing by four to get the thickness in micron or dividing by 4000 to get the thickness in mm. Here are some common examples:100 gauge = 25 micron = 0.025mm120 gauge = 30 micron = 0.03mm200 gauge = 50 micron = 0.05mm250 gauge = 62.5 micron = 0.0625mm400 gauge = 100 micron = 0.1mm
What is "it"?What is it? Wire? Sheet metal? What?PolytheneIn the case of polythene, gauge can be converted to thickness by dividing by four to get the thickness in micron or dividing by 4000 to get the thickness in mm. Here are some common examples:100 gauge = 25 micron = 0.025mm 120 gauge = 30 micron = 0.03mm 200 gauge = 50 micron = 0.05mm 250 gauge = 62.5 micron = 0.0625mm 400 gauge = 100 micron = 0.1mm
50 micron will filter more than 25micron
how can u make tracing and drafting film 50 micron
50 of anything is normally smaller than 62.5 of the same thing.
No smaller (exactly half to be precise)
You can try Tego chemie's "Foamex 810 ". Actualy it is not recommended for epoxy systems, but it works-----
They are equivalant, 50 microns equals 50 mT.
6 mils is 50% thicker than 4 mils.
The answer depends on the material and thickness of the wire.
It is 50/254 which can be simplified to 25/127.
We divide the overburden thickness by ore thickness to get the stripping ratio For example if we have an overburden thickness of 80m and ore thickness of 50 m , then the stripping ratio will be: 80/50= 1.6