It is 50/254 which can be simplified to 25/127.
A mil is a thousandth of an inch. 3 inches is therefore equivalent to 3000 mils.
They are incompatible units. Mils are used for angular measurement not linear measure.
5 mil is equivalent to 0.005 inches. The term "mil" refers to one-thousandth of an inch, so to convert mils to inches, you divide by 1000. Therefore, 5 mils equals 5/1000 inches or 0.005 inches.
an inch is what fraction of a yard
.0005 of an inch is equivalent to 0.0005 inches, which is also known as five ten-thousandths of an inch. This measurement is quite small, often used in precision engineering and manufacturing contexts. To put it in perspective, it is 0.5 mils, as there are 1,000 mils in an inch.
80 mils =80/1000 inch, or 2/25 inch
- mils are a unit of measure - 1 mil is 1/1000 of an inch thick - 75 mils is 75/1000 of an inch, or .075 inch
30/1000 = 3/100
A mil is a thousandth of an inch. 3 inches is therefore equivalent to 3000 mils.
Mils = One thousandth of an inch. Refer below web page for further clarification. http://acronyms.thefreedictionary.com/One+Thousandth+of+An+Inch 1 inch = 25.4mm 1 mils = 1 inch / 1000 = 0.001 inch 0.001 inch = 0.001 × 25.4 mm = 0.0254 mm
Mil means 1/1000 of an inch.
They are incompatible units. Mils are used for angular measurement not linear measure.
what are the units of .03 - is it inches? If so .03 inch = 30 mils
1 inch = 25.4 millimetres0.03937 inch = 1 millimetre0.00003937 inches = 1 micron0.03937 mils = 1 micron1 inch = 25.4 millimetres0.03937 inch = 1 millimetre0.00003937 inches = 1 micron0.03937 mils = 1 micron1 inch = 25.4 millimetres0.03937 inch = 1 millimetre0.00003937 inches = 1 micron0.03937 mils = 1 micron1 inch = 25.4 millimetres0.03937 inch = 1 millimetre0.00003937 inches = 1 micron0.03937 mils = 1 micron
.4 of an inch as a fraction is 4/10 or 2/5 of an inch in its simplest form
In the United States, One Mil is understood to be one one thousandth of an inch, or 0.001 inches. Mils are frequently used in measuring plastic, film, and sheet materials in applications that do not use the metric system.90 mils is equal to 0.090 inches, or 90/1000ths of an inch, which reduces to 9/100ths of an inch.However, fractional parts of inches are normally measured in powers of two (for example, 1/4 inch, 1/8 inch, 1/16 inch, and so on). In this case, we cannot get an exact answer, but we can come acceptably close.If using thirty-seconds of an inch (1/32), you can get pretty close to 90 mils. 3/32 of an inch is equal to 0.09375 inches, or approximately 94 mils. For most applications, that's probably accurate enough.For better accuracy than that, you would need to measure in 256ths. 23/256ths of an inch is approximately 0.0898 inches, which is within one mil tolerance of 90 mils.
5 mil is equivalent to 0.005 inches. The term "mil" refers to one-thousandth of an inch, so to convert mils to inches, you divide by 1000. Therefore, 5 mils equals 5/1000 inches or 0.005 inches.