The electrical code states you can load a breaker to 80% of its capacity. The electrical code also states that, for loading purposes, one receptacle can be treated as one amp. Therefore, by code, a 20 amp breaker can supply 16 receptacles.
The NEC (National Electrical Code) used in the United States has no requirement on the number of receptacles on a 20 amp circuit in a residential setting. The circuit should only service 500 sq. ft. of the dwelling, so a room for example of say 20 feet by 25 feet would be 500 sq. ft. It would require one 20 amp circuit. This circuit could also be used for the lighting load in this room. This is the minimum requirement to meet code and not always the best wiring practice.
30X240=7200
No, a double pole 50 amp breaker protects a 240 volt supply at 50 amps. The number that is on the handle of the breaker is the amperage that the breaker will trip at if an overload occurs on the circuit.
A 15 amp circuit breaker will handle this situation very well. The smallest home breaker is rated at 15 amp.
Yes, you can. It will be fully protected as it can actually handle a 30 amp breaker.
Watts = Amps x Volts. 60 x 240 = 14400
Handle a "What"?
30X240=7200
No, a double pole 50 amp breaker protects a 240 volt supply at 50 amps. The number that is on the handle of the breaker is the amperage that the breaker will trip at if an overload occurs on the circuit.
A 15 amp circuit breaker will handle this situation very well. The smallest home breaker is rated at 15 amp.
14 gauge will handle it with a 15 amp breaker. If you use 12 gauge use a 20 amp breaker.
Yes, you can. It will be fully protected as it can actually handle a 30 amp breaker.
Watts = Amps x Volts. 60 x 240 = 14400
2.3 kw per hour on a 110-120 volt circuit.
When I went to a 100 amp service I could not find a 100 amp. breaker in stock. I used a 60 amp. breaker and have never blown it. The 200 amp you are using can handle up to 200 amps, but if you use a smaller breaker it will only handle up to that amperage. The 200 amp is usally the total amperage of all the breakers comming out of the box. You will probably never come anywhere near using 200 amps at one time.
Look on the handle end of the main breaker. There should be a number there. That is the amperage of the main breaker. That is the size of your house service.
50 amp breaker.
It's the amps that are controlled by the breaker not the volts. You can have a 600 volt 15 amp breaker, you can have a 347 volt 15 amp breaker. The breaker will trip when you exceed 15 AMPS.