That would be 169 square inches. Divide by 144 and you get 1.17 square feet.
If linear feet is measured by the standard 12 inch scale, then: * 1 linear foot = 12 inches * 24 linear feet = 288 inches If you have 13 inch tile then: * 288 inches / 13 inches = 22.15 tiles per row.
I assume that the tile is a square of 13 inches by 13 inches. There are exactly 12 inches in 1 foot, so 13 inches is (13 inches)*(1 foot / 12 inches) = 13/12 feet. The "inches" units cancel out; this type of procedure can be used with any units based on ratios. So we have a 13/12 foot by 13/12 foot square tile. To get the area of this tile, we just recall that the area of a square is just the square of the length of a side (just multiply the length of any side by itself). That means the area of this tile is (13/12)^2 square feet, or 169/144 square feet. If we perform the division to get decimal notation, we get 1.17361... square feet. Since we only have 2 significant digits in our initial information (the tile company cannot make tiles that are exactly 13 inches on each side, the real length is greater than or less than 13 inches by an unknown amount), we can only have at most 2 significant digits of accurate information in our result. If the original length is very close to exactly 13 inches, then the area should be close to 1.17361... square feet. The closest area with 2 significant digits to that area is 1.2 square feet.
13 feet = 156 inches So, 13 feet 10 inches = 166 inches
These 327 tiles will cover an area of 383.8 square feet.
13 feet is 156 inches.
13 in = 1.08333333 feet
13 feet 2.5 inches.
Assuming 13x13 is in inches, then one tile is 13/12 feet x 13/12 feet so the area of one tile is (13/12)^2 = 169/144 and the area of 44 tiles is 44*(169/144) = 51.639 feet2
You can do one of the following to calculate this: 1) Convert inches to feet. Then multiply to get the area in square feet. 2) Multiply first, to get the area, but this time in square inches. Divide the square inches by 144 to convert to square feet.
There are 161/12 = 13 feet and 5 inches
One tile of size 13' by 13' will cover 169 square feet and so will be more than sufficient.
About one hundred =========== 13 feet = 13 x 12 inches = 156 inches The area of a room 13 feet x 13 feet = 156 x 156 sq. in. = 24336 sq. in. area of 1 tile = 16 x 16 sq. in. = 256 sq. in. Dividing area of room (in sq. in.) by area of one tile: 24336/256 = 95.06 95 tiles are needed for a room 13' x 13'