Answer for USA, Canada and countries running a 60 Hz supply service.
I think the answer you are looking for is 204 volt-amps. In a light that would be 204 Watts but since a motor doesn't use Watts it is simply called volt-amps.
I don't mean to confuse you. Calling it 204 Watts would certainly be understood.
<><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
Need to know the running amp draw. Starting amps would be useful l too. The average amp draw for a simple 1hp motor is about 7 amps, such as a fan motor. Ohms law says amps times voltage = watts, so 7 amp times 120v=840 watts. Consider that starting amperage is about 1-1/2 times running load, starting watts would be about 1200. You would need about a 1200 watt inverter to run that motor.
if its a single current its 120v X 25 amp = 3000 watts
You can't.
There are zero amps in a watt. I = W/E. W = A x V. It depends on how many volts there are. Since watts is amps times volts, amps is watts divided by volts. If you had a 120V circuit with 1 watt, there would be 1/120, or 0.00833 amps flowing in that circuit Note: This is the resistive answer, with a power factor of 1. For reactive loads, things change, but the basic question is answered.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
Need to know the running amp draw. Starting amps would be useful l too. The average amp draw for a simple 1hp motor is about 7 amps, such as a fan motor. Ohms law says amps times voltage = watts, so 7 amp times 120v=840 watts. Consider that starting amperage is about 1-1/2 times running load, starting watts would be about 1200. You would need about a 1200 watt inverter to run that motor.
if its a single current its 120v X 25 amp = 3000 watts
You can't.
There are zero amps in a watt. I = W/E. W = A x V. It depends on how many volts there are. Since watts is amps times volts, amps is watts divided by volts. If you had a 120V circuit with 1 watt, there would be 1/120, or 0.00833 amps flowing in that circuit Note: This is the resistive answer, with a power factor of 1. For reactive loads, things change, but the basic question is answered.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
317.025280 KILOWATTS = 317,025.28 WATTS
120v /240v
744
600 watts
The formula for watts is, Watts = Amps x Volts.
It would depend on how deep your well is, and how efficient the pump.
120Watts=1Amp