555.5 square yards.
108 square feet = 12 square yards.
1 square yard = 9 square feet 72 square yard x 9 square feet/square yard = 648 square feet you may try using the online converter linked below next time
11.1 square yards = 100 square feet.
100 yards is 300 feet because there are 3 feet in 1 yard.
The units are incompatible. Even though this may be true you can change them using Dimensional Analysis . First you do 9 sq ft. = 1 sq yard. Then you do 100 sq yards times 9 = 900. That's 900 sq ft. then you could simplify by finding the square root of 900 which is 30.
Depends on how wide the bolt of fabric is. A "yard" of fabric will always be three feet long, but it may be varyingly wide.
There are nine square feet in one square yard, so:57 square yards x 9 = 513 square feet.
One yard is three feet.
A square yard can represent a square with dimensions of 3 feet by 3 feet. Therefore a 7 foot diameter gasket cannot be cut out of a square yard. If you meant 7 inches diameter, then you will be able to cut 25 gaskets from 3 feet by 3 feet but you may even be able to cut 26 gaskets if the square yard was a rectangle of 7 inches wide (by 185 inches long).
The question as stated makes no sense, as square feet is a measure of area and "yard", is a measurement of volume. Normally, "yard" is a measurement of length. However, concrete, soil, gravel, sand, etc., are normally sold (in the U.S.) by the "yard" which is simply short for "cubic yard." However, you may easily calculate the area that a yard of crushed rock will cover, depending on the desired depth of crushed rock. As a cubic yard is 3 feet by 3 feet by 3 feet, which is equivalent to 9 square feet by 36 inches, simply divide 36 inches by the desired depth in inches, and multiply it by 9 square feet. Thus, if you wanted a depth of 8 inches, 36 divided by 8 is 4.5. So, you can cover 4.5 square yards, or 4.5 times 9 square feet = 40.5 square feet, which would be a square area approximately 6 feet 4 inches by 6 feet 4 inches.
A yard is a unit of length. A square foot is a unit of area. The two units are therefore incompatible.
I think it means 10 feet by 10 feet, so 10 ft. x 10 ft. =100 ft. I may be wrong, but I'm pretty sure that's what it means.