104 square feet = 9.66192 square meters.
The units are incompatible. Even though this may be true you can change them using Dimensional Analysis . First you do 9 sq ft. = 1 sq yard. Then you do 100 sq yards times 9 = 900. That's 900 sq ft. then you could simplify by finding the square root of 900 which is 30.
Multiply the two dimensions to get the area. The calculation will give you 54 square feet.
1 feet is a length unit square meter is an areaunit. There is nothing equal.The possible question may be: 1 square feet is how many square meters?"1 square feet equals 0.09290304 square meters.Scroll down to related links and look at "Conversions of area and surface units"
1 acre = 4840 square yard = 43560 square foot= 4046.86 square meteryou may try below link for online conversion
1 square yard = 9 square feet 72 square yard x 9 square feet/square yard = 648 square feet you may try using the online converter linked below next time
555.5 square yards.
Depends on how wide the bolt of fabric is. A "yard" of fabric will always be three feet long, but it may be varyingly wide.
There are nine square feet in one square yard, so:57 square yards x 9 = 513 square feet.
One yard has 3 feet1 foot has 12 inches12 inches x 3 feet = 36 inches36 inches x 3 yard= 108There are 108 inches in 3 yards3 yards = 108 inches
A square yard can represent a square with dimensions of 3 feet by 3 feet. Therefore a 7 foot diameter gasket cannot be cut out of a square yard. If you meant 7 inches diameter, then you will be able to cut 25 gaskets from 3 feet by 3 feet but you may even be able to cut 26 gaskets if the square yard was a rectangle of 7 inches wide (by 185 inches long).
One yard is three feet.
The question as stated makes no sense, as square feet is a measure of area and "yard", is a measurement of volume. Normally, "yard" is a measurement of length. However, concrete, soil, gravel, sand, etc., are normally sold (in the U.S.) by the "yard" which is simply short for "cubic yard." However, you may easily calculate the area that a yard of crushed rock will cover, depending on the desired depth of crushed rock. As a cubic yard is 3 feet by 3 feet by 3 feet, which is equivalent to 9 square feet by 36 inches, simply divide 36 inches by the desired depth in inches, and multiply it by 9 square feet. Thus, if you wanted a depth of 8 inches, 36 divided by 8 is 4.5. So, you can cover 4.5 square yards, or 4.5 times 9 square feet = 40.5 square feet, which would be a square area approximately 6 feet 4 inches by 6 feet 4 inches.
A yard is a unit of length. A square foot is a unit of area. The two units are therefore incompatible.
1 yard = 3 feet200 feet divided by 3 feet/1 yard = 66.67 yards
According to the reference given below referring to the land measuring unit Gunta, in Pakistan, 1 anna = 20.16 sq yd. Since 1 square yard is 3*3=9 square feet, 1 anna is 20.16*9=181.44 square feet.
1440 square feet