0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many square inches does a 60 lb bag of sand cover?
The answer will depend on how deep a layer of sand.
How many square yards in one ton of sand?
That depends entirely on what kind of sand how deep you spread it. As an approximation, you could assume a bulk density for dry sand of about 110 lb/ft3. One ton (2000 lb) of sand would thus be about 18.18 ft3 or 0.673 yd3. If you spread it 6 inches deep you could cover about 4 square yards. At a foot deep, you would cover 2 square yards. At 3 inches deep you would cover 8 square yards. At 1 inch deep you would cover 24 square yards Reported bulk densities for sand range from 78 lb/ft3 for molding sand to 130 lb/ft3 for moist sand.
How many 50 lb bags of sand will you need for a 8 foot by 8 foot patio 2 in deep?
Your patio is (8x8)/6in = 10.66 cubic foot. The sand comes in 50 lb bags that cover 0.5 cubic foot so you will need 21.33 bags (round up to 22 or down to 21)
How much sand will you need to fill an area 16ft by 17 ft and 8 inches deep?
V = 16x17x8/12 = 181 1/3 cubic feet sand has a density of about 2.7, water weighs 62.4 lb/ft3 Wt = 2.7x62.4x(181 1/3 ) = 30551.04 pounds or about 15 1/4 tons of sand
How many 50 lb bags of sand do you need to cover a 18 foot diameter circle 3 to 4 inches deep?
Way to many. I think each bag does a cubic foot. It is much better to get masons sand delivered by dump truck if possible. Normally about $ 250 for this size pool. Roughly about 4 tons.
How much of an area does 60 lb sand cover?
The area that 60lbs of sand will cover is dependant on how deep you want it.æ One hundred pounds of sand equal 1 cubic foot.Your customer service rep at your local storeæcan calculate how much you will need.
How many square inches does a 60 lb bag of sand cover?
The answer will depend on how deep a layer of sand.
How much area can a 100 lb bag of seed cover?
A 100 lb bag of grass seed will cover approximately 10,000 square feet. Make sure to read the instructions and purchase the seed that best matches the area (i.e. sun, shade, etc.).
How many square yards in one ton of sand?
That depends entirely on what kind of sand how deep you spread it. As an approximation, you could assume a bulk density for dry sand of about 110 lb/ft3. One ton (2000 lb) of sand would thus be about 18.18 ft3 or 0.673 yd3. If you spread it 6 inches deep you could cover about 4 square yards. At a foot deep, you would cover 2 square yards. At 3 inches deep you would cover 8 square yards. At 1 inch deep you would cover 24 square yards Reported bulk densities for sand range from 78 lb/ft3 for molding sand to 130 lb/ft3 for moist sand.
How much area will a 25 lb bag of grout cover?
tile size 18X36 and 1x2 what is the covverage of a 25# bag of grout
How many 50 lb bags of sand to cover a 10 x 10 area 3'' thick?
You will need about 30 cubic feet. Your bag should also tell you how many cubic feet are in it.
How many 50 lb bags of sand to make a cubic foot?
I'll use the density of dry, packed sand, which is 100 lbs per cubic foot, 50/100 is 2 50 lb bags of sand
How much does a roll of felt cover?
15 lb. 400 sq. ft. 30 lb. 200 sq. ft.
How much is sand worth per pound?
Depending where you go ,and if you want fancy sand or craft sand , but I read somewhere its around 8.7 cents per lb , best I can do
How much does 1 cubic foot of sand cost?
Really depends on your region. Where I'm at bank sand goes for about $100 a load. 12 cubic yards.
How many 50 lb bags of sand will you need for a 8 foot by 8 foot patio 2 in deep?
Your patio is (8x8)/6in = 10.66 cubic foot. The sand comes in 50 lb bags that cover 0.5 cubic foot so you will need 21.33 bags (round up to 22 or down to 21)
How much does a lb of regular cheese cost?
A pound of cheddar is about $5.00 in my area
