50 cu. fts or 1.8518 cu. yds.
1 (cubic yard) = 46 656 cubic inchesIf the depth is 2 inches then the area it will cover is 46656/2 square inches = 23,328 square inches. Convert 23,328 square inches to square yards23 328 (square inches) = 18 square yards
Gravel is bought in cubic quantities, or by weight. You ask "to fill" but you only give a square measure. The volume of gravel required wil depends on the depth you wish the gravel to be. To fill 81 square metres to a depth of 5 cm would require 4.05 cubic metres of material.
That depends on how deep you want to spread it. To cover 600 square feet, you need (111/9) cubic yards for every 6 inches of depth.
Depends on what depth you want to spread the gravel at. This answer depends on knowing the cubic capacity of 50 lbs. of gravel.
There is not enough information to figure the cubic feet of the pallet. The depth would be needed for that. There is enough information to figure the surface area, which is measured in square feet, square inches, etc. To find the area of an object, take the length times the width. 40 inches X 48 inches = 192 square inches or 16 square feet.
9.26 cubic yards for every inch of depth.
The answer will depend on the depth to which the gravel is to be spread.
1 (cubic yard) = 46 656 cubic inchesIf the depth is 2 inches then the area it will cover is 46656/2 square inches = 23,328 square inches. Convert 23,328 square inches to square yards23 328 (square inches) = 18 square yards
Depends on depth of gravel you plan to put down. For each 1 inch depth: Estimate gravel having a density of 2.7. 150 x 1/12 x 62.4 x 2.7 = 2106 pounds (slightly more than 1 ton) so if you want 3 inches of gravel you need about 3 tons of gravel
First, find the total square footage of your driveway. You can find this by multiplying the length of the driveway by the width of the driveway. When you have determined the square footage, you need to decide how thick you will apply the gravel. At a depth of 1", 1 cubic yard of gravel will cover 320 square feet. So for example, if you would like to put down 3 inches of material over 1000 square feet, you would do the following. 1000 square ft./320 = 3.125 3.125*3" depth = 9.375 yards
For 576 square feet at a depth of 4 inches, you will need 7.11 cubic yards.
The volume that needs to be filled is 132ft * 1.5in = 132ft*(1.5/12)ft=132ft*0.125ft=16.5 cubic feet of gravel needed. ---- 1 cubic foot is 1,728 cubic inches (12 in x 12 in x 12 in) The area described above is 28,512 cubic inches divided by 1,728 cubic inches or 16.5 cubic feet
Gravel is bought in cubic quantities, or by weight. You ask "to fill" but you only give a square measure. The volume of gravel required wil depends on the depth you wish the gravel to be. To fill 81 square metres to a depth of 5 cm would require 4.05 cubic metres of material.
That depends on how deep you want to spread it. To cover 600 square feet, you need (111/9) cubic yards for every 6 inches of depth.
Depends on what depth you want to spread the gravel at. This answer depends on knowing the cubic capacity of 50 lbs. of gravel.
378000 Cubic inches.
To calculate the amount of soil needed, you multiply the area by the desired depth. In this case, you have 9300 square feet and want a depth of 12 inches. Convert the depth to feet (12 inches = 1 foot) and multiply: 9300 square feet x 1 foot = 9300 cubic feet of soil. So, you need 9300 cubic feet of soil to cover the area with a depth of 12 inches.