Want this question answered?
Technically yes, but any fluctuation above 600 may cause failure.. 600 PSI of water is A Lot of pressure I would recommend a valve with a 1200 wog and 300 wsp rating.. ask for a 300 lb ball valve at any supply house and they will know what you are talking about.. it is a much more expensive and withstands much more abuse.
10 psi.
.4 psi
about 2 psi. (0.5 psi / foot of depth)
Depends on the height. You gain approximately 0.4 psi for every foot of elevation; so at 10 foot elevation you will have ~4 psi.
600 psi
500 psi
500 psi
Depends on the size of the cylinder, if the air is compressed or not and if it is compressed, to how much psi.
Four cylinder is 15 psi. Six cylinder is 40 psi.
around 125 psi per cylinder
10 feet x 0.433 psi/ft = 4.33 psi at the base of the cylinder.
3 psi
there is no such thing. psi is how much oxygen is in a certain amount of space (mostly used for deep divers
"600 psi" is not a compression ratio; it's a pressure. For a RATIO, you need to compare TWO different numbers.
around $45 in Washington state
Four cylinder is 15 psi. Six cylinder is 40 psi.