10 psi.
12.01 psi
.4 psi
Multiply inches of WC by 0.0361 to obtain PSI.
14"
Multiply by 0.036 http://www.enercongroup.com/conversion_factors.htm One PSI is equal to 27.7 inches of water column
12.01 psi
27.71 inches of water column equals 1 psi
.4 psi
30ft rise = 13 psi (pressure is 13 psi higher at bottom of a 30ft column that at the top). Water Pressure = .433 psi per ft for a column of water at 62 degrees F.
10 feet x 0.433 psi/ft = 4.33 psi at the base of the cylinder.
1 psig is equivalent to 51.71 mm (2 in) of mercury or to approx 700 mm (27.5 in) of water. Technically one cannot have apsig. Psig represents a pressure reading of the pressure above normal atmospheric pressure of 14.7 psi. You mean a psi.
Head pressure is created by a column (depth) of water in a container. Pipe is considered a container. Diameter is not a factor. The higher the column of water, the more psi it creates. Multiply column height of water by .434 to get psi of water.
Every 2.3077 feet of water in a column increases the water pressure at the bottom of the column by 1 pound per square inch.A 39 foot column of water with a pressure of 120 psi at the base will have a pressure exerted on its top surface of 103.1 psi.39 ft/ 2.3077 ft/1 psi = 16.9 psi ; 120 psi -16.9 psi = 103.1 psievery meter of water in a column increases the pressure at the base of the column by 0.1 kg./ sq. cm (or 1 kilopascal)A 12 meter column of water exerts a pressure at its base of 12 kPa. (or 1.2 kg/sq. cm)
Multiply inches of WC by 0.0361 to obtain PSI.
0.25 psig = 413.7 inches of water column
super
You need to know how high the water column is to calculate the pressure it exerts at its base! For example, a column of water 1 metre deep would exert a pressure of 9.81 kPa at its base (density x gravity x depth - 1000 * 9.81 * 1). This would be equal to approx 1.42 PSI.