The pipe is a cylinder.
Volume of a cylinder = (pi) x (Radius)2 x (length)
Radius = 1/2 diameter
Volume of the pipe = (pi) x (1)2 x 120 = 120 pi = 377 cubic inches = 1.632 gallons.
That's the volume of the pipe. I have no way to know if there's anything in it.
The volume of the pipe is (pi) x (radius)2 x (length)= (pi) x (2)2 x (120)= 1,507.964 cubic inches = 6.528 gallons (rounded). I have no way of knowing how much water may be in it.
To determine how much water a 6-inch pipe can hold, you need to calculate its volume based on its length. The volume (in gallons) can be found using the formula for the volume of a cylinder: ( V = \pi r^2 h ), where ( r ) is the radius (3 inches for a 6-inch pipe) and ( h ) is the length of the pipe in inches. For example, a 10-foot (120-inch) length of a 6-inch pipe would hold about 18.9 gallons of water.
There need not be any water in the pipe! The volume of the pipe is 1044 Imperial gallons
250 million chicken nuggets can fight in a 120in. pipe at one time, i know from experience. Just thought that I would share that with the world. Thank you and have a great day. By the way, this is what you get for using answers.com.
Yes and it can be schedule 80 and schedule 120
120 inch pounds = 10 foot pounds.
Assume the "3 inch" is the pipe's inside diameter.Capacity = (pi x R2 x L) = (pi x 1.52 x 120) cubic inches.1 gallon = 231 cubic inches.Gallons capacity = (pi x 2.25 x 120 / 231) = 3.672 gallons (rounded)That's the capacity of the pipe. We have no way of knowing how much water is in it.We only know that it's no more than 3.672 gallons.
The volume of water in a pipe can be calculated using the formula: V = πr^2h, where V is the volume, r is the radius of the pipe (which is half the diameter), and h is the length of the pipe. Given a 4-inch pipe, the radius is 2 inches, and converting to feet, it becomes 0.167 feet. Therefore, the volume of water in a 4-inch pipe that is 10 feet long is approximately 7.89 cubic feet.
water or something else?ZERO as the 120 PSI exceeds the safe WOG pressure rating..GREAT trick question
120
The water pressure at the bottom of the pipe can be calculated using the formula P = ρgh, where P is the pressure, ρ is the density of water (1000 kg/m³), g is the acceleration due to gravity (9.81 m/s²), and h is the height of the pipe (188 ft = 57.3 m). Plugging in the values, the pressure at the bottom of the pipe would be approximately 56,700 Pa, or about 8.23 psi.
About 120 pounds About 120 pounds