There need not be any water in the pipe!
The volume of the pipe is 1044 Imperial gallons
50 gallons of water!
Volume of a cylinder = (pi) (radius)2 (length)Volume = (pi) (0.25-ft)2 (20-ft) = 1.25 (pi) cubic feet = 3.927 cubic feet = 29.376 gallons (rounded)
That section of hose holds 25.5 gallons of water when it's full, which weighs about 213 pounds. To that, add the weight of the empty hose, which I don't know.
The answer depends on your local water company.
0.1 tsp, because one gallon is one tenth of ten gallons, so you need one tenth, or 0.1, tsp.
If the pipe is round, with a 55-foot diameter, and 36 inches long, then its capacity is 53,317.3 gallons. If the pipe is round, with a 36-inch diameter, and 55 feet long, then its capacity is 2,908.2 gallons. Either way, we have no way of knowing how much water is in it. For all we know, it may even be empty.
A 100-foot hose with an inside diameter of five inches can hold 102 US gallons of water.
A 4-ft diameter pipe holds approx 78.3 US gallons.
8.15 gallons
A pipe does no water. Te capacity of the pipe with the given dimensions is approximately 98.2 US gallons. Whether or not the pipe holds any water is impossible to say.
1 ft.3 (cubic) of water = 7.48 gallons How high is the pool? Is it 24 foot wide, 54 foot long and how deep? diameter x diameter x average depth x 5.9 = total gallons Allowing for the overflow/filter access, fill to 48" deep and use 13,000 gallons in a flat-bottomed pool.
Approx 10.3 US gallons.
The volume of the pipe is (pi) R2 L = (pi) (0.25)2 (2,835) = 556.651 cubic ft = 4,164 gallons. (rounded)We have no way of knowing how much water is in it.It may even be empty for all we know.
A cylinder measuring 12-ft high and 4-ft diameter has a capacity of 1,128 gallons. (rounded)We have no way of knowing how much water is in it. The well may dry, full of debris,or completely empty.
The Ohio River is 981 miles long.
A 24-inch diameter cylinder holds 23.5 gallons of water per foot of length/height.
To calculate the volume of water in a 12-inch diameter pipe that is 100 feet long, first convert the diameter to feet: 12 inches is 1 foot. The radius is therefore 0.5 feet. The volume ( V ) of a cylinder is given by the formula ( V = \pi r^2 h ), where ( r ) is the radius and ( h ) is the height (or length). Plugging in the values, ( V = \pi (0.5)^2 (100) \approx 78.54 ) cubic feet. Since there are about 7.48 gallons in a cubic foot, this is approximately 587 gallons of water.