answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How much water pressure to raise water 1 foot?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Math & Arithmetic

How much water pressure can you get with gravity?

Depends on the height. You gain approximately 0.4 psi for every foot of elevation; so at 10 foot elevation you will have ~4 psi.


How much water in a 16' x 32' pool?

How much water do I have a 16x32 foot pool with debt of 4 foot to 6 foot


How much pressure is exerted on the lower edge of a 12 foot by 24 foot by 4 foot deep pool?

about 2 psi. (0.5 psi / foot of depth)


How much pressure is in a water tank that is 180 feet and give your answer per square inch?

I presume you mean at a depth of 180 feet. Since the weight of a cubic foot of water is approximately 65 pounds, the weight of water on a square foot at that depth is 65 times 180, which is 11,700 pounds. That is the pressure per square foot. Since there are 12 x 12 or 144 square inches in a square foot, the pressure in pounds per square inch would be 11,700 divided by 144, or about 81. This is in addition to the barometric pressure, which is about 14 pounds per square inch, for a total of 95 psi.Answer 1It's not possible for a water tank to be 180 feet. One of its dimensions could be, however.Sadly, since we don't know which dimension it is, nor do we know the height ofthe tank or the depth of the water in it, nor do we know at what level or in whichdirection you want the pressure measured, there's no way at all to even begin towork on a solution to this question.


How much water do you have in my 14 X 28 foot in-ground pool that is 5 foot deep?

I do not have any water in your pool. You may have some but not me!

Related questions

How much water to raise a 14 X30 swimming pool 1 inch?

Assuming you mean a 14 foot by 20 foot pool, you need the following amount of water to raise it 1 inch:261.818 US liquid gallons; OR218.009 imperial (UK) gallons; OR991.089 liters


How much water pressure can you get with gravity?

Depends on the height. You gain approximately 0.4 psi for every foot of elevation; so at 10 foot elevation you will have ~4 psi.


How much pressure is in 328 feet of water?

If it is fresh water, and the surface is at sea level, then the pressure at the surface is 14.69 psi. As you submerge, then the pressure from the weight of the water above you is added to the air pressure above the water. For each foot that you descend, the water pressure will increase by 0.4331 psi, so at 328 feet deep, the water pressure is 142.0568 psi. Add the 14.69 psi air pressure to get 156.7468 psi.


How much pressure is needed to raise water one foot?

This question is misguided. You don't need pressure, you need energy. Energy = work done = mass of water x g (acceleration due to gravity) x height raised. Pressure = force/area over which it is applied (e.g. the cross section of the water pipe.) So the pressure needed is given by P = mgh/area Be sure your value of g is in the right units for your mass and height measurements. Differential air pressure will be shown by raising the water level in, for example, a U shaped tube, where differentail pressure is applied between the two arms. Yes, to move the water, energy is used. BTW, energy equals force (weight) times distance, but you are not lifting all the water by one foot.


How much pressure does it take to crush a foot?

Depends on the size of the foot - a child's food will take far less pressure to crush than an adult man's foot.


How much water in a 16' x 32' pool?

How much water do I have a 16x32 foot pool with debt of 4 foot to 6 foot


How much head pressure lossin a 30 foot rise?

30ft rise = 13 psi (pressure is 13 psi higher at bottom of a 30ft column that at the top). Water Pressure = .433 psi per ft for a column of water at 62 degrees F.


How much pressure to break a foot bone?

40 pounds


How much pressure is exerted on the lower edge of a 12 foot by 24 foot by 4 foot deep pool?

about 2 psi. (0.5 psi / foot of depth)


How much pressure is created at the base of a 10 foot column of water psi.?

10 feet x 0.433 psi/ft = 4.33 psi at the base of the cylinder.


How much pressure does a water hose have?

4,000 PSI working pressure


How much water does a 4 foot 1.5 foot 2 foot aquarium hold?

12 cubic feet