Want this question answered?
A Ream is a measure of the NUMBER of sheets of paper (500 sheets) How thick that would be will depend on the weight of the paper. Heavier paper is thicker.
3000
A US penny is 1.55mm thick. Thus a stack of 1,000,000 pennies would be 1,550,000mm, or 1.55 kilometers (0.963 miles) high. A Canadian penny is 1.45mm thick. Thus a stack of 1,000,000 pennies would be 1,450,000mm, or 1.55 kilometers (0.901 miles) high. A post-1992 British penny is 1.65mm thick. Thus a stack of 1,000,000 pennies would be 1,650,000mm, or 1.65 kilometers (1.025 miles) high.
If it is sheets of paper in reams (500) = 1 pack
It would remain 1mm thick.
Assuming a standard sheet of paper is 0.1mm thick, the height of a million sheets of paper stacked on top of each other would be 100 meters (328 feet).
A stack of papers.
That would depend on how thick the polythene sheets were.
A sheet of standard copy paper is about .004 in thick. 100 sheets would therefore have a thickness of about 0.4 in. Modern, lightweight paper sold for home printing is much thinner and 500 sheets have a thickness of 1" approx. So, 100 sheets would be about 0.2 in.
2511.16071 lbs.
depends how big the square is
this would be roughly as high as a ten story building
A Ream is a measure of the NUMBER of sheets of paper (500 sheets) How thick that would be will depend on the weight of the paper. Heavier paper is thicker.
It is physically impossible to fold a piece of paper in half more than 8 times. However, assuming you could do it (though it would be easier to cut the pile so far in half and put one half on top of the other), then: After 1 fold the stack has 2 sheets After 2 folds the stack has 4 sheets After 3 folds the stack has 8 sheets After n folds the stack has 2^n sheets After 50 folds the stack will be 2⁵⁰ sheets thick As each sheet is 0.1mm, the stack will be: 2⁵⁰ × 0.1 mm = 112589990684262.4 mm thick = 112589990.6842624 km thick ≈ 1.126 × 10¹¹ m thick
Depends on the paper. 24-pound printer paper is 0.004" thick, which means there are 250 sheets per inch.
Sheets of thick polythene stretched over a framework of bamboo canes would work.
Have you tried a King size sheet? Or perhaps sewing a couple of sheets together?