This will depend greatly on the filter you want to use. A flat filter will need to be larger than a pleated filter. Determine what efficiency you need from your air filter. Look up the maximum "face velocity" across the filter, most are around 500fpm. Divide the blower cfm by the filter fpm and you will end up with ft2 or filter needed. Let's do an example of a 2000cfm blower with a filter that requires a face velocity of 400feet/min. 2000ft3/m / 400ft/m = 5ft2 or (1)24"x30" filter.
The question does not specify of what object the curved surface area is required. Without this information then a meaningful answer cannot be provided.
Usually, you divide by the area of a single tile. But this may not work if the tiles have an unusual shape, or if you need fractional tiles to cover the entire area.
Calculate the area of the room. Calculate the area of the window (or whatever opening) Room Area*100/Window Area
You cannot determine the height from the information provided: more is required.
Cubic millimeter is not an area, it is a volume. In any case, you would need some information about how large an area would be covered by every welding electrode.
The question does not specify of what object the curved surface area is required. Without this information then a meaningful answer cannot be provided.
1 car required 25 sq. mts space for surface parking 1 car required 35 sq. mts space for basement parking you can calculate your area how much car is ur requirement u can dive area with car area
TOTAL AREA=201, REQUIRED AREA=201/6=33.3. As 60 degrees covers only 60% or one sixth of a circle, to calculate required area, divide the total area by 6.
To calculate how much paint needed for pipe painting, the pipe must first be measure for area. After the area is calculated, the amount of paint needed can easily be found out by figuring out how much area each can covers.
Usually, you divide by the area of a single tile. But this may not work if the tiles have an unusual shape, or if you need fractional tiles to cover the entire area.
First you need to know what force is required. The pressure the cylinder is going to work at. From this you can wok out the area of the piston and then the diameter of the piston. Force = Pressure x Area
The township of Blowers is located in the Fergus Falls metro area of Otter Tail County. It is in west central Minnesota maybe 30 miles east of the border with North Dakota.
length x width = area
Calculate the area of the room. Calculate the area of the window (or whatever opening) Room Area*100/Window Area
You cannot determine the height from the information provided: more is required.
You cannot determine the height from the information provided: more is required.
Cubic millimeter is not an area, it is a volume. In any case, you would need some information about how large an area would be covered by every welding electrode.