To calculate the total square meters of the outside surface area of your shed, you need to find the area of each side and then add them together. Let's break it down:
The shed has four walls:
Two walls measuring 16 feet long by 8 feet high (front and back)
Two walls measuring 9 feet wide by 8 feet high (sides)
Calculate the area of each wall:
Front and back walls: 16 feet long * 8 feet high = 128 square feet each
Side walls: 9 feet wide * 8 feet high = 72 square feet each
Add up the areas of all four walls:
Total area for front and back walls: 2 * 128 square feet = 256 square feet
Total area for side walls: 2 * 72 square feet = 144 square feet
Add the areas of all walls together to get the total surface area:
Now, to convert square feet to square meters, you can use the conversion factor: 1 square meter = 10.764 square feet.
So, to find the area in square meters:
400 square feet * (1 square meter / 10.764 square feet) ≈ 37.16 square meters
Therefore, the total outside surface area of your shed is approximately 37.16 square meters.
Now, to determine how much cladding you need, it depends on the type of cladding and its dimensions. You would need to calculate the area covered by each piece of cladding and then divide the total surface area of the shed by the area covered by one piece of cladding. This will give you the number of pieces needed.
Asbestos Super Six cladding typically weighs around 8-10 kg per square meter. However, the weight may vary depending on the specific brand and thickness of the cladding.
about 10.5 square feet
2500 tiles
One square metre is the area of a square whose sides measure exactly one metre.
83m^2
That depends on how thin you spread it. If it's a meter thick, it only covers one square meter. If it's a centimeter thick, it covers a hundred square meters.
One cubic meter cannot be "converted" to a square measure unless we know how "deep" it is being spread. For example, if it is one meter deep, then it would cover one square meter; but if it is two meters deep, then it would cover half that area. If it were, say, 1 cm deep, then it could cover a million square centimeters (100 x 100 x 100).
the size of you!>!CK
Strangely enough, exactly one square metre!
4
You would need 25 (5x5).
As a linear meter is a length with zero width, even with an infinite number of them they will not cover an area of 30 square meters.