50 meters = 164ft plus 1/2inch (rounded)
There are about 10.76 square feet in every square meter. So if you have a price listed in square meters to convert it to fee you need to multiply the price by 10.76.
2 meters = 6.561 679 79 feet If you need the mathematical eqation, set it up as a proportion: 1 meter 2 meters ---------- = ---------- 3.280 feet X feet Direct Conversion Formula2 m* 1 ft 0.3048 m = 6.56167979 ft
You need to know the density of the marble.
Cubic meters are a measure of volume. The volume of a cube is simply the product of multiplying the length of its sides. Depending on the units you need for the answer, you would either convert the measurements in meters to inches, or the measurement in inches to meters. It would probably be best to convert the thickness measurement into meters. Then multiply the 3 lengths together, and that is your product. Convert to meters from inches: 1 inch x (1 cm/2.54 in) x (1 meter/1000 cm)
Yes, you need to know the density of tarmac which varies depending on the aggregate used but is around 2.4 tonne per cubic metre
Length is the longest or greatest extent or measurement or dimension of something.Height is the extent or length of something from a given level upwards.Feet is the number of units of length.If you have height in feet, you don't need to convert it into anything.If you have height in feet and you need/want to convert it to a different unit of length, such as meters, then you will need a conversion ratio such as 1 meter = 3.2808 ft = 1 m / 3.2808 ftThen do the following calculation to convert ft to meters:6 ft * (1 m / 3.2808 ft) = ~1.83 m
how we can convert running meter to cubic running meter To get cubic meter, you need to know the length, the width, and the height. Multiply those three together to get volume in cubic meters. You can't get cubic meter just by knowing one dimension such as running meter. You need all three dimensions.
You need to specify the original units. Do you want to convert 850 metres to feet/inches? 850 light-years?
1.25 meters is about 4.1 (4.10104987) feet.
you need to specify what units the lengths are. convert the length to feet (google). then multiply the length by width
You cannot convert length nor width to yards. The length and width need t be measured in some units such as inches, feet, miles, metres, etc. You can convert from one unit of length to another using an appropriate conversion factor.
Multiply meters by 3.28083 to get feet.For those that need to show their work...Algebraic Steps / Dimensional Analysis____ m*100 cm1 m*1 in2.54 cm*1 ft12 in=? ft
you need to add two feet to get a meter
To convert cubits to feet you need to multiply the origin by 1.4999999999999982
A square foot is a unit of area. A foot is a unit of length. The two units are therefore incompatible.
All you need to do is multiply the length by the width, and it doesn't matter in what order you do it. 20ft X30ft= 600 square feet.
In order to convert gun feet into sqft, you will need to convert the gun feet to cubic feet. To do this, you will need to use the following equation: cubic feet by dividing 25,434 by 24.