To convert meters to square feet, you need to know the conversion factor between meters and feet. Since 1 meter is equal to approximately 3.28084 feet, you would first convert the length in meters to feet. Once you have the length in feet, you would then square that value to find the area in square feet. For example, if you have a length of 5 meters, you would first convert that to approximately 16.4042 feet, and then square that value to find the area in square feet.
To convert seconds to feet, you need to know the speed or distance being traveled. Without that information, you cannot directly convert seconds to feet.
To convert 2.66 tons per cubic meter to tons per cubic feet, you first need to convert cubic meters to cubic feet. There are approximately 35.3147 cubic feet in 1 cubic meter. Once you have the conversion factor, multiply the given value (2.66 tons per cubic meter) by the conversion factor to get the equivalent value in tons per cubic feet.
To convert square meters to cubic feet, you need to know the depth or height in meters. Once you have the depth, you can multiply the square meters by the height to get cubic meters, and then convert cubic meters to cubic feet by multiplying by 35.3.
158cm is equivalent to 1.58 meters. To convert centimeters to meters, you need to divide the length by 100 because there are 100 centimeters in a meter.
To convert meters to square feet, you need to know the conversion factor between meters and feet. Since 1 meter is equal to approximately 3.28084 feet, you would first convert the length in meters to feet. Once you have the length in feet, you would then square that value to find the area in square feet. For example, if you have a length of 5 meters, you would first convert that to approximately 16.4042 feet, and then square that value to find the area in square feet.
Length is the longest or greatest extent or measurement or dimension of something.Height is the extent or length of something from a given level upwards.Feet is the number of units of length.If you have height in feet, you don't need to convert it into anything.If you have height in feet and you need/want to convert it to a different unit of length, such as meters, then you will need a conversion ratio such as 1 meter = 3.2808 ft = 1 m / 3.2808 ftThen do the following calculation to convert ft to meters:6 ft * (1 m / 3.2808 ft) = ~1.83 m
You need to specify the original units. Do you want to convert 850 metres to feet/inches? 850 light-years?
1.25 meters is about 4.1 (4.10104987) feet.
To convert seconds to feet, you need to know the speed or distance being traveled. Without that information, you cannot directly convert seconds to feet.
you need to specify what units the lengths are. convert the length to feet (google). then multiply the length by width
You cannot convert length nor width to yards. The length and width need t be measured in some units such as inches, feet, miles, metres, etc. You can convert from one unit of length to another using an appropriate conversion factor.
Multiply meters by 3.28083 to get feet.For those that need to show their work...Algebraic Steps / Dimensional Analysis____ m*100 cm1 m*1 in2.54 cm*1 ft12 in=? ft
To convert feet to square meters, you first need to convert the measurements to square feet by multiplying the length by the width. In this case, 18 feet by 16 feet equals 288 square feet. To convert square feet to square meters, you need to multiply by 0.0929. Therefore, 288 square feet is approximately 26.76 square meters.
To convert 2.66 tons per cubic meter to tons per cubic feet, you first need to convert cubic meters to cubic feet. There are approximately 35.3147 cubic feet in 1 cubic meter. Once you have the conversion factor, multiply the given value (2.66 tons per cubic meter) by the conversion factor to get the equivalent value in tons per cubic feet.
To convert running meters to cubic meters, you need to know the width and height of the object in question. First, calculate the area in square meters by multiplying the length (in running meters) by the width. Then, multiply the area by the height to get the volume in cubic meters. This conversion is essential for determining the amount of space an object occupies in three dimensions.
you need to add two feet to get a meter