0
What else can I help you with?
What is the Depth and Width of 500 acres?
500 acres is 21,780,000 square feet. Assuming dthe depth is greater than the width, the depth can be any number greater than sqrt(21780000) = 4666.91 ft. Suppose the depth is D feet then a rectangular area with width = 21780000/D will have an area of 21780000 sq ft or 500 acres.
How much dirt is in a whole 3 acres square and 200 feet deep?
To determine the volume of dirt in this scenario, you would multiply the area (3 acres) by the depth (200 feet). First, convert acres to square feet (1 acre = 43,560 square feet). Then, multiply the area (3 acres = 130,680 square feet) by the depth (200 feet) to find the total volume of dirt.
How much is 1000 acres of land?
It is about 1.56 square miles in area.
What is the outside diameter of 4300 acres?
It depends on the shape of the area. If it is a circle with an area of 4,300 acres, the diameter of the circle would be 15,440 feet.
How many acres are in a 1000 ft radius?
Circle with 1000 ft radius: Area = pi*(radius^2) So 3.14159265 * (1000 ft)2 = 3141592.65 square feet Convert square feet to acres: 1 acre = 43560 square feet. 3141592.65 square feet / (43560 square feet/acre) = 72.1210434 acres.
If the area of a park is exactly halfway between 2.4 and 2.5 acres what is the area of the park?
If the area of the park is exactly halfway between 2.4 and 2.5 acres, it would be the average of these two values. To find the average, you would add 2.4 and 2.5 together and then divide by 2. This gives you 2.45 acres as the area of the park.
How many acres is Massachusetts?
Massachusetts has a total area of roughly 7 million acres.
How many acres on Galveston Island?
the area is 64 square miles, by my conversion that would be 40,960 square acres
What is the dimensions of two square acres?
A square area that was two acres would be about 295 feet on each side.
330 feet wide by 1320 feet deep would contain how many acres?
The area of land described would be 10 acres. To calculate this, multiply the width (330 feet) by the depth (1320 feet) to get the total square footage (435,600 square feet), and then convert that to acres (1 acre = 43,560 square feet).
How many gallons of water would it take to fill a 1000 foot hole?
The answer depends on the cross sectional area of the hole as well as its depth. There is not enough information provided to answer the question.
What is the measurements of 2.44 square acres?
A square with an area of 2.44 acres would measure 326.016 feet on each side.
