Want this question answered?
to shift the frequency of information signal ,at the frequency domain to a higher frequency ...so the information can be transmitted to the receiver .
pam
A motor
High voltage.
A: A VOM digital requires to have a ADC analogue to digital converter whereby the analogue input will be displayed as number representation. An analogue meter all it requires is to have is current flow through it.
Some disadvantages of a flexible manufacturing system include: complexity of a flexible manufacturing system, requires highly skilled technicians, high level of planning, and higher initial investment.
Adding an extra length of shaft on the existing shaft to take extra pulleys will put an extra load on the bearings supporting the shaft. In the long term this would shorten the life of the bearings. The makers might be able to supply more information like the side-load specification for the bearings. If in doubt support the outer end of the shaft.
True: they a living plans which requires periodic reviews
A screw is self fastening, as it bores out and threads the hole it goes into. A bolt does not bore out its own hole, and requires an additional fastener (a nut) if if goes into a hole which is not threaded.
When runing flexible conduit it is required strap the it inches from a box coupling or conector
When runing flexible conduit it is required strap the it inches from a box coupling or conector
Modern dance requires more flexibility than jazz dance.
the pressure would simply crush a person in a flexible one so the rigid diving suit allows the person to go deeper than they normally would with a flexible wet suit
Rubber is a flexible solid - (assuming you are referring to rubber bands, tyres, etc.) - Chemically why it is both requires expansion.
Skis specificallly meant for racing are often less flexible (ie: stiffer) than average recreational skis. In order for the ski to bend less, it requires a denser, heavier, and less flexible core.
A person going to the depths of the sea requires a rigid diving suit instead of a flexible one because of the extense pressure of the fluid. As we know that pressure at a point in a fluid is directly proportional to the depth of that point, thus, a deep sea diver needs a rigid suit.
Because you are less likely to get injured if you are flexible because the tendons are more elastic.