0
What else can I help you with?
What is the cubic yards of mattress 7 feet long 6 feet wide and 8 inches deep?
The mattress would have a total area of roughly 1.04 cubic yards. However, a cubic yard is one yard long by one yard wide by one yard deep. The mattress is only 8 inches deep, not enough to equal a yard, so it really does not have any one area that is a cubic yard in size.
How many cubic yards of gravel to cover 12'by 15' area?
62/3 cubic yards for every 1-foot deep. 5 cubic yards for every 9-inches deep. 31/3 cubic yards for every 6-inches deep. 5/9 cubic yard for every 1-inch deep.
What is 100m3?
One hundred cubic metres Example a cube measures 100 metres wide and long and deep So total area is 1,000,000 cubic metres or 100m3 i.e. 100x100x100m
How many cubic yards of mulch 2 deep will you need for an area 271 square feet?
One cubic yard of mulch will cover approximately 160 square feet at 2" deep, so you would need approximately two cubic yards of mulch to cover 271 square feet at 2" deep.
How much topsoil do you need to cover an 8ft by 5ft area?
That depends on how deep you want the top soil! 5' X 8' = 40 square feet. If you want it 1' deep you would need 40 Cubic Feet, 3" deep you would need 10 cubic feet of top soil.
How many yards of topsoil do you need to cover an area 8' x 12' x 3 deep?
if that is 3 ft deep it would require 96 yards... IF it is 3 inches deep it would require 24 cubic yards
1 cubic meter covers an area of how many square meters?
One cubic meter cannot be "converted" to a square measure unless we know how "deep" it is being spread. For example, if it is one meter deep, then it would cover one square meter; but if it is two meters deep, then it would cover half that area. If it were, say, 1 cm deep, then it could cover a million square centimeters (100 x 100 x 100).
How many bags of 5 cubic feet of gravel would it take to cover about 112 suare feet of area?
It depends upon how deep you want it covered. To cover it one inch deep would take 112 sq ft X 1/12 ft = 9.3 cubic feet = 2 bags @ 5 cubic feet each.
How much area does a ton of topsoil cover?
one ton equals one cubic meter of soil was 100mm deep it would cover 7sqm
How much sand is needed for an area 10 foot x 10 foot?
An area 10 foot x 10 foot is 100 square feet. 100 cubic feet of sand would cover it with a one foot deep layer of sand. If the sand needs to be 6 inches deep, then 50 cubic feet are be needed, or 25 cubic feet if the sand is to be 3 inches thick.
What is the volume of an area 24 feet round and 45 inches deep?
The volume of an area 24 feet round and 45 inches deep is: 1,700 cubic feet.
How many cubic meters are there in 40 hectares 15cm deep?
There are 60,000 m3 in a 15cm deep plot with an area of 40 hectares.
