0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How can you tell whether a figure has rotational symmetry?
Same length, same width, same size, same shape
If twelve is the same as a dozen what would be the same as score?
If twelve is the same as a dozen, then twenty would be the same as score.
What means same sides and same shape?
if something is same size, same shape means that it is congruent or symmetrical.
Is 1 third of a hexagon the same as 1 third of a trapezoid?
It depends on what you mean by "same". The same area? Yes, it can be. The same shape? Yes, it can be. The same are and shape, Yes, it can be.
When are two vectors equal and when are identical?
if they're going in the same speed, same direction, same length and same magnitude
Is 200mA the same as kilohms?
No, 200mA is not the same as kilohms.Amperes is a unit of current flow. Ohms is a unit of resistance. Other than being related by Ohm's law - Voltage = amperes x ohms - the two units are not the same.
200ma in amps?
200ma is .200 amps or .2 amps
Can you use a 9v dc 200mA ac adaptor in place of a 500mA?
Yes. The current rating should be the same or greater than the original. This means the adapter can supply up to 500mA; In your case it only needs to supply 200mA, so it is more than up to the job.
What are the release dates for The Helmetcam Show - 1996 98-02A 3-1?
The Helmetcam Show - 1996 98-02A 3-1 was released on: USA: 4 February 1998
What are the release dates for The Helmetcam Show - 1996 99-02A 4-1?
The Helmetcam Show - 1996 99-02A 4-1 was released on: USA: 3 February 1999
Who is the owner of this vehicle bearing registration number jh 02A 6667?
Bob
What is the Maximum voltage that can be given to a 555 timer?
18 Volts.
Can you use a 9v 300mA adapter on a 9v 200mA device?
No. The adaptor will overheat.
How many amps is 200mA?
There are, 2000/1000 = ,amps in 2000 milliamps. For the math challenged that is 2 amps.
Can i replace a dc 9 v transformer 200 mA for a 500 mA?
Yes. Yes, you can replace a transformer with one that has a higher current rating. The load on the transformer should be less than 200mA because presumably that is what the circuit was designed for. Since the current through the transformer should be less than 200mA, the 500mA transformer will not be damaged. The opposite is not true. You should not replace a 200mA rated transformer with a 100mA transformer, for example. If the current exceeds 100mA, the transformer could fry.
Can a 100 mA adapter be substituted with a 200 mA adapter?
A 9V 1A adapter will supply up to 9 Watts of power and a 9V 200mA adapter delivers up to 1.8W of power. The 200mA adaptor may not be able to supply enough power to a device that has been supplied with a 1A adapter. The 1A adaptor should operate equipment that originally used a 200mA adapter. Before using a different power supply, check that the outputs are both DC or both AC. If they are both DC, it is important to check that the polarity at the connector is the same for both. If AC and DC supplies are swapped or the polarity is swapped there is a risk that the equipment will be damaged.
Can a 9v 800ma adapter be used on a 9v 200ma device?
Yes. There's a subtle difference in the meaning of the "--- ma" labels on the two units:-- On the "device" ... the unit that uses power ... the "200ma" is the current it useswhile it's operating.-- On the "adapter" ... the unit that supplies power ... the "800ma" is the maximumcurrent that it's able to supply. Anything less than that is easy.So your adapter is OK to operate your device. In fact, with suitable wiring and a bit ofcooling, it could nominally operate 4 of them at the same time.
