0
Is there a recessed lighting fixture you can put a heat light bulb in?
Wiki User
∙ 13y ago
Yes. They are well insulated and have thermal cutoff switches.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Can a 220V light fixture be used in the US?
Yes, you can easily use it. Just install it as you would any other 120 volt light fixture and change the bulb from a 240 volt bulb to a 120 volt bulb. It will work just fine.
Is is ok if the lighting fixture ground wire is wrapped around the bottom of the chain and the ground wire from the light box is connected to the ground screw on the mounting crossbar?
If you are referring to a porcelain or plastic ceiling light fixture most do not have a place to connect the ground wire. You cannot ground these type fixtures. Just connect the ground wire to the mounting crossbar and forget about connecting it to the light itself. It is on the ceiling and will never be touched unless you change the bulb and then you will have the switch in the off position. It is perfectly safe.
Why is light fixture hot?
When electricity runs through the fillament in a light bulb, the electrons move so fast that they generate heat, which also creates light. Light bulbs actually create more heat than light.
Can a light bulb cause fire?
Yes it can. If a light bulb breaks, the exposed filament will burn out within a couple of seconds and can ignite something with the spark when the filament breaks. Special bulbs can be made for explosive environments to minimize the risk of ignition, such as lighting at a refueling station. A light bulb can also be in close proximity to a combustible substance when it is operating and can cause a fire by making the combustible substance too hot. Florescent lights are less likely to cause fires because they run cooler and are safer in hazardous environments where a conventional light bulb would not be good. <<<>>> No. The filament will burn out in milliseconds not seconds and not enough time to ignite anything in a normal atmosphere. Special bulbs are not made for explosive environments it is the fixture that the bulb goes into that have the explosion proof rating. Fluorescent lamps in hazardous environments again are protected by the fixture that they are installed into. If the light bulb breaks the filament will be exposed to oxygen in the air and burn itself open. It is when the light bulb is in close proximity to a combustible substance when it is operating, that a fire hazard becomes a reality.
Is there a code for fluorescent light fixture covers?
I do not know of a specific code in the United States. However, a flourescent fixture should be covered if breaking a bulb would create serious problems, such as in a kitchen, a place where children play, etc. In lieu of covering the whole fixture they manufacture tubes that cover the bulbs themselves for the same purpose.
What are the advantages of choosing recessed lighting in the home?
Recessed lighting offers illumination but for the most part doesn't involve itself in the decor as light fixtures do. Recessed lighting does, however, contribute to a sleek look in a room, and because it doesn't project from the wall or ceiling, can add to the spacious feel of the space. Recessed lighting allows for a variety of light bulbs. It can be used as directional lighting, e.g., to highlight artwork or architectural features. Recessed lighting is a great idea for closets and pantries where an exposed bulb or fixture might create a hazard.
How many watts does a recessed light used?
The wattage rating of a recessed light is governed by the amount of heat it can dissipate. The wattage rating is set by a standards organization and has to be adhered to by the manufacturing company. The label that is on the recessed light fixture is the maximum size incandescent bulb that can be used in the fixture. Depending on the bulb size used in the fixture will reflect the amount of watts the recess light will use.
How To Choose Recessed Lighting Fixtures?
Every living area needs lighting. Indoors or outdoors, lighting sets the mood for a living space. There are many types of lighting fixtures that can be used to illuminate an area; one type is recessed lighting fixtures. Recessed lighting fixtures are installed in a hole in the ceiling. The main housing part of the lamp is in the ceiling and is not visible; only the outer trim can be seen. Recessed lights can provide a narrow beam of light like a spotlight. They can also produce a broader beam of light like a floodlight. When choosing recessed lighting fixtures for your home, you need to keep you lighting needs in mind. Do you need to illuminate a large area? If so, a recessed light that provides a broader beam will meet your needs. If you're using the light to highlight a particular area in the room, a fixture with a more narrow beam is preferable. Style is an important consideration, too. Even though the main body of a recessed lighting fixture is hidden away in the ceiling, the outer trim and the bulb are visible to the onlooker. Recessed lights do come in an assortment of colors (usually black, white, or silver) and styles. Some fixtures are flush with the ceiling;others are recessed futher into it. Recessed lighting fixtures are usually fixed in place, but some are adjustable so you can direct the light where you want it. And though most are round, some recessed lighting fixtures come in other shapes such as an octagon. Recessed lighting fixtures use a variety of bulbs, too. Some use incandescent bulbs, some use flurorescent bulbs, and some use halogen bulbs. What type of bulb a fixture uses will affect energy efficiency and the type of light they provide. Lighting is an important consideration when designing a living space. Though there are many types of lighting fixtures available to a property owner, recessed lighting fixtures are a practical and stylish way to add light to any living area.
What is indirect light?
Indirect lighting is a light fixture that has been concealed. They are not always easily accessible like a light bulb is.
Is a light bulb considered a fixture?
A fixture is what the light bulb goes into.
Which type of lighting is best for a bathroom ceiling?
The best lighting for a bathroom ceiling is a hanging light fixture with more than one bulb. You don't want all of the light in your bathroom to come from a single bulb.
How does one change the bulb in a pot light lighting fixture?
Changing the bulb in a pot light lighting fixture can be very easy. First you need to take off the whole "can" or cylinder that surrounds the light by pulling downwards gently. Next you should find the cord that attaches to the light and detach it. Then you attach the new bulb and put the can and cylinder back on. Turn the switch back on and you're done.
Where does the bulb sit in a bronze pendant lighting ceiling fixture?
A small bulb is placed inside the open cage of a bronze pendant lighting ceiling fixture. One can purchase these lighting fixtures at Home Depot or Lowe's.
How do you loosen a light bulb that is stuck in the fixture?
One way to loosen a light bulb that is stuck in the fixture is to break the bulb. You can then use half of a potato to unscrew the bulb from the fixture. You can also make a loop with duct tape, adhere the middle of the loop to the light bulb. Use the two ends to twist the bulb out of the fixture.
What is the shape of bulb?
Types of Incandescent bulbs: A-LINE:a standard lightbulb shape available in a variety of wattage and color options. Reflector:an indoor bulb used for directional lighting such as recessed light or as a spot light. Globe:Around bulb typically used without a shade, such as in vanity lighting Candle:Adecorative bulb that can be used with dimmers or as accent lighting in chandeliers Flicker:Afilmament in the bulb that resembles a flickering flame. Typically used in chandeliers and candelabras.
What bulbs go with recessed lighting?
Recessed lighting fixtures can take all sorts of bulb, including halogen and incandescent. Hire an electrician to install them as factors such as correct spacing between them are very important.
What is a key less light fixture?
It just holds the bulb, does not have a switch in the fixture.
