The answer will depend on several things for which no information is available:
30/2 = 15 linear feet of material 2 feet wide. It is 8 feet long so you need 2 sheets
You can't tell. You need to know both area and width to get a length.
1 yard=36 inches
Inch and centimeter are both linear units of measurement. They are used to measure small distance. The conversion is done by multiplying the inch measurement by 2.54. The above unit in inches equals 91.44 cm (Approximately).
To convert inches to feet just divide by 12 (since there are 12 inches per foot).156 in = 13 ft
62 linear inches is the same as a length of 62 inches. You don't need to figure, just get a measuring tape!
You don't need to. 12" is 1 linear foot.
It can't be done. Inches are linear, square inches measure area.
If linear feet is measured by the standard 12 inch scale, then: * 1 linear foot = 12 inches * 24 linear feet = 288 inches If you have 13 inch tile then: * 288 inches / 13 inches = 22.15 tiles per row.
i have a 1250 square foot deck and need to figure out how many linear feet of decking material I need. the boards are 6 X 10
You need the radius, and the height, of the cylinder.
Not enough information. You would need to multiply three linear measurements to get a volume.
In order to take linear measurements you will need a measure - a tape measure, yardstick or ruler. The type of measure you use will be determined by what you are measuring.
Is this a trick question? You only need three figures if you are calculating cubic feet. You have just described a "Box" not a backsplash (normally figured in linear feet).
There are 25.4 millimetres in an inch. You need to divide the millimetres figure by 25.4 to convert to inches.
That depends on how wide your board is. A six inch wide board will need 25 x 25 x 2 (1250) linear feet to cover the area. A three inch wide board will need 25 x 25 x 4 (2500) linear feet to cover the area.
30/2 = 15 linear feet of material 2 feet wide. It is 8 feet long so you need 2 sheets