0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is a silver screw in a new wall receptacle for?
The screw is actually only silver in color and it is where the neutral wire(s) get connected to, (white wire). the gold colored screw gets connected to the positive(black or red) wire(s). Green screw is for ground wire.
What are the common wiring in a receptacle?
Black wire is HOT, white wire is NEUTRAL and bare or green wire is GROUND. The black wire goes to brass colored screw, the white wire goes to silver colored screw and the bare wire goes to green screw that is connected to the metal "frame" of the receptacle.
Which wire goes on the ground fault receptacle?
In normal home wiring the black and white supply the circuit voltage. The green conductor connects to the green screw. The black conductor connects to the brass coloured screw and the white conductor connects to the silver coloured screw. There are additional terminals on the receptacle that connect to the down stream side of the circuit. By making these connections on the GFI receptacle all downstream normal duplex receptacles are also protected.
How are the live neutral and ground wires connected to a duplex grounding type receptacle?
The black "hot" conductor goes to the brass coloured screw. The white coloured conductor goes to the silver coloured screw. The bare ground conductor goes to the ground green coloured screw
How do I wire a Kitchen outlet?
Black wire to gold screw, white wire to silver screw, ground to green screw. If you are using a GFIC outlet then the hot wires coming in hook to the Line side of the GFIC receptacle and the wires going out to other receptacles hook to the load side.
How do you construct a simple circuit?
STEPS IN CONSTRUCTING A SIMPLE ELECTRIC CIRCUIT:1.Prepare the materials.2.Remove the bulb from the receptacle.3.Unscrew the screw in the receptacle using a screw driver.4.Extend the cord of a wire using pliers.5.Connect the cords of the wire in between the loosen screw and the receptacle.6.Put the bulb again on the receptacle.7.Attach the cord at the end of both batteries.
How do you construct a simple electric circuit?
STEPS IN CONSTRUCTING A SIMPLE ELECTRIC CIRCUIT:1.Prepare the materials.2.Remove the bulb from the receptacle.3.Unscrew the screw in the receptacle using a screw driver.4.Extend the cord of a wire using pliers.5.Connect the cords of the wire in between the loosen screw and the receptacle.6.Put the bulb again on the receptacle.7.Attach the cord at the end of both batteries.
Is a bottle cap a a screw?
A screw has external threads, so methinks the screw-top BOTTLE is really the screw, and the cap a mere receptacle. Yes. And a screw is really a modified wedge or incline.
Is a bottle cap a screw?
A screw has external threads, so methinks the screw-top BOTTLE is really the screw, and the cap a mere receptacle. Yes. And a screw is really a modified wedge or incline.
What color wire is attached to the narrowest slot in a duplex receptacle?
I do not know what you mean by long slot. The bare ground copper wire connects to the green screw or the ground screw. The black wire attaches to the copper or gold colored screw and the white wire connects to the silver or chrome screw. Both the gold and silver screws are on the side of the outlet. The ground screw will be on one end of the outlet.
How do you put a household receptacle on the end of an extension cord?
Yes, the receptacle will have to be terminated in a receptacle box of some kind. Construction usually use an FS type box with a 1/2" hub. A 1/2" strain relief connector is used to hold the extension cord into the FS box. Wire the white wire of the cord to the silver screw, black coloured wire to the brass screw and the green wire to the green ground screw on the receptacle. The cover plate should be weatherproof FS type if the cord is to be used outdoors. If for indoor use a normal steel cover plate designed for use on a FS box will work fine. If strictly for indoor use, a box called an 1110 utility box, will also work to hold the receptacle.
Can you put a receptacle on the end of an extension cord?
Yes, the receptacle will have to be terminated in a receptacle box of some kind. Construction usually use an FS type box with a 1/2" hub. A 1/2" strain relief connector is used to hold the extension cord into the FS box. Wire the white wire of the cord to the silver screw, black coloured wire to the brass screw and the green wire to the green ground screw on the receptacle. The cover plate should be weatherproof FS type if the cord is to be used outdoors. If for indoor use a normal steel cover plate designed for use on a FS box will work fine. If strictly for indoor use, a box called an 1110 utility box, will also work to hold the receptacle.
