Pipe Size = 28" OD x 0.562" thk Quantity of pipes = 12,718 meters. Double Random Length = 12.2 meters Nos. = 1042 pcs. Weight of concrete coated pipes = 11,072 MT
the volume of a steel sheet plate is < length *breath *height >
Length X Width X Depth = volume
Volume in cubic units = pi*radius2*length
five to six meters
This is not a valid conversion. kg is a measure of weight or mass and cubic meters is a measure of volume.
Steel Springs can be used in newton meters because without exceeding the elastic limit the steel spring will always remain its original length and shape, giving us clear and precise results
Use the formula for a cylinder to find out the volume. Then multiply the volume by the density of steel (about 7900 kg/m3 - but it may vary slightly depending on the type of steel).
The question cannot be answered sensibly. The weight of an object depends on its volume and volume depends on the length, breadth and height of the object. Given only the length it is impossible to give an answer. It would, for example, be impossible to distinguish between 12 inches of a steel wire and 12 inches of a steel block!
volume of steel multiplied by7850= wt of steel in kgs. Please note that wt of 1 Cum steel is 7850 kg Volume of steel bar can be calculated = cross-sectional area of bar X length cross-sectional area of Bar= pie x d X d/4 (where d is diameter of bar)
weight of all steel can be calculated by multiplying unit volume with density.
Density of steel: 7.85 g/cm3 Volume of the steel would be: 0.6*0.6*pi*1200=1357.168 cm3 =10653.77grams=10.65kg.
Consider the volume of the pipe as the difference in the volume of two cylinders, one containing the whole pipe and the other the empty space inside. Use the formula for the volume of a cylinder : Pi*r*r*h. Find the volume of the first cylinder with the larger radius and subtract from it that of the cylinder with the smaller radius. The height (or length) is the same for both volume calculations. The result of subtracting these is the volume occupied by the pipe.