0
What are fall protection suitable when workers are required to pass over an excavation more then six feet deep?
Wiki User
∙ 9y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many syllables in the word workers?
The word workers has two syllables.
If the property size is 144 units and 35 percent of them are factory workers how many factory workers live at your property?
144 * 35/100 ~= 50.4 workers. Since you can't have a fractional worker, the answer would be rounded to 50 workers.
The arc proof standard NFPA70E?
NFPA70E: Standard for Electrical Safety in the workplace 2000 Edition. NFPA 70E describes the electrical hazards thread in the workplace. NFPA70E have required that the employers have to show the easy-happening electric contact level with file specification when workers work in breakdown protection within the boundaries. NFPA: According to the distance between the staff's face and chest whom working in the special work and the potential arc source to define the electric contact level with law. The workers use fire protective clothing and personal protective equipment, according to the specific work easy-happening electric contact level, need to wear enough degree of protection equipment. The work involved in 70E Installation conductive material, and other electrical equipment on industrial substation, resident or commercial buildings Connection Equipment and power supply Install other outdoor conductive material Category: NFPA 70E requirement Move and visibility: When workers wear fireproof, flame retardant or other treated protective clothing, protective clothing should be covering all flammable clothing, the wearer can move, visibility is good. Body protection: All the workers should wear flame retardant protective clothing who works in any place that may exposure to the arc flame. These protective clothing can be made for the shirt and pants, coverall, jumpsuit or overalls, protective clothing and jackets, which makes to achieve the greatest degree of protection. Outer layer: The FR clothing outside clothing, ex, jacket, waterproof clothing also need to use flame retardant materials. Lining layer: Personal wear layer fabric (underwear) should be avoided to using melt synthetic fibers. Wearing in nonflammable and non melt in the arc and the associated hazards underlying clothing will provide additional protection. Cover degree: Protective clothing should be as full as covered in potentially parts. Care and Maintenance: All personal protective equipment should be maintained in the health and credible conditions. Personal protective equipment and personal protective equipment used as protection system Strata: As an added layer of protection hierarchy system can use FR and natural fiber clothing. Typical hierarchy system: including one T shirt, shirt, pants and coverall. Specified work can be used in special protection equipments.
What percentage of workers in china are underpaid?
90 % of workers in China are underpaid by western standards
If a crew of 4 workers complete the job in 10 hours how long will it take 5 workers to complete the same job?
Eight hours.
Do construction workers put up fences?
yes they can put it up around excavation sites
What is the system called that supports the sides of an excavation?
The system that supports the sides of an excavation is called a shoring system. It is designed to prevent the walls from collapsing and ensure the safety of workers in the excavation site. Shoring systems can be temporary or permanent, depending on the construction project.
How was the Panama Canal constructed?
With channel locks that saved workers about 10 million cubic feet of excavation.
For workers on scaffolds fall protection must be providedat what level?
Workers must be provided with fall protection when climbing at 10 feet.
What is the safe way to get into a deep excavation?
The safe way to enter a deep excavation is to follow proper safety protocols, such as using a ladder or properly sloped access ramp, ensuring proper shoring or support systems are in place, and having a spotter or standby person outside the excavation. Workers should be trained on excavation safety and have appropriate personal protective equipment.
Are employers required to excuse time off for employees to meet with military recruiters when considering enlistment in the armed forces?
No. USERRA provides no protection except to workers already in the military.
What is the works of Supporting the sides of excavation?
Supporting the sides of an excavation involves using techniques such as shoring, sloping, or trench boxes to prevent the walls from collapsing and ensure the safety of workers inside the excavation. The goal is to provide a stable working environment by either physically supporting the soil or altering the slope of the walls to prevent cave-ins. It is crucial to follow proper excavation safety protocols to minimize the risk of accidents and injuries.
What ways to avoid excavation hazards was mention in the construction etool?
Some ways to avoid excavation hazards mentioned in the construction eTool include conducting soil analysis to identify potential hazards, providing proper protective measures such as sloping, shoring, or shielding, and ensuring that workers are trained on excavation safety procedures and emergency response protocols.
Which are the following ways to avoid excavation hazards?
Properly identify and mark underground utilities before excavating. Use safe digging practices, such as hand digging or hydro excavation. Ensure all workers have appropriate training and follow safety protocols. Monitor the excavation site for any signs of potential hazards, such as cave-ins or gas leaks.
What are the set of facts or circumstances that surround a situation on an excavation site?
The set of facts or circumstances surrounding a situation on an excavation site can include the location of the site, the type of soil or terrain being excavated, any underground utilities or structures present, the depth and dimensions of the excavation, the weather conditions, the presence of any hazardous materials, and the safety measures in place to protect workers and the public. These factors are important to consider in order to ensure the excavation is conducted safely and efficiently.
What are the differences between horizontal and vertical laminar flow hoods?
In a horizontal laminar flow hood, the laminar air flows towards the outside (i.e. towards the worker). There is hence no protection to the worker and it is not suitable for cytotoxic drug preparation. In a vertical laminar flow hood, the laminar air flows downwards from the top, providing more protection for the workers. Vertical laminar flow hoods are hence suitable for preparing cytotoxic drugs.
Is workers comp required for employees that work less than 40 hours?
WC coverage is required for full- and part-time workers.
