0
It means there is an open circuit. You could translate as zero Load.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you convert ohm meter to megohm kilometer?
if it is ohm meter and not ohm per metre; divide by 1,000,000 to convert ohm to megaohm, then divide by 1000 further to convert metre into kilometre
What is the resistivity of copper at 75 degrees?
0.02 micro ohm /meter
Who discovered the mathematical law of electrical current?
Are you talking about Ohm's Law. Voltage = (Current) x (Resistance). Georg Ohm
What does baro meter mean?
Baro is wind ... Meter is pressure
What do centi-and milli- mean?
They mean: centi as in centimeter is 1/100 of a meter and milli as in millimeter is 1/1000 of a meter
What does DVOM mean?
It stands for digital volt-ohm meter
How do you test glow plugs on a 6.0 liter?
The best way that I have found to test the glow plugs on anything is with a simple ohm meter. If your meter says ol, (open line) they are completely dead but looking up the ohm value or contacting your dealer and comparing numbers from what they say and what your meter says is the best way. You should have a tolerance to be between. If you Are not there, odds are its bad
1ohm meter how many mega Ohm cm?
1 Ohm meter X (Mega Ohm/ 1000 Ohms) X (100 cm/meter) = 100/1000 Mega Ohm cm = 0.1 Mega Ohm cm method: dimensional analysis
What is the Unit of capacitance in ohm and meter?
Capacitance is measured in Farads. "The unit... in ohm and meter" does not make sense.
How do you convert ohm meter to megohm kilometer?
if it is ohm meter and not ohm per metre; divide by 1,000,000 to convert ohm to megaohm, then divide by 1000 further to convert metre into kilometre
What meter has its own power source?
Ohm meter
How do you find out if a wire is grounding out?
Get a multimeter and put it on the ohm setting. Touch the wire with one probe and the engine block with the other lead, if the meter reads anything but OL, it's shorted to ground.
How do you check the injectors on a 6.2 dielse with ohm meter?
You can check glow plugs with an ohm meter. should be <1ohm
How do you ohm out a motor?
To ohm out a motor one would use an ohm meter. If one does not own or can not obtain a meter, the motor can be taken to a shop and ohmed out there for a fee.
How do you test a rheostst?
ohm meter
How do you chack risestance?
With an Ohm meter.
Which is a measurement of resistance?
By ohm meter.
