0
if auto related it stands for top dead center and refers to the position of the crank in relation to the positon of the number one cylinder.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Rotor button want line up with number one tower at top dead center advance timing with harmonic balanicer lines up number one but 40 degrees before tdc car pops rich fuel runs rough new engine help?
You must be at TDC on the Compression stroke.
What is the compression ratio for an engine if each cylinder has a maximum volume of 500 cubic centimeters and a minimum volume of 50 cubic centimeters?
Compression ratio is exclusive to each cylinder, though they will all have the same result if they are the same dimensionally ( and they always are) > Divide the total engine capacity by the number of cylinders, this gives the capacity or swept volume of each cylinder (bore * stroke) > So in a 2.0 (2000 cc) litre 4 cylinder engine, each cylinder has a 2000 / 4 = 500 cc swept volume (bore * stroke) > The combustion chamber is the volume remaining at top dead centre (TDC) > Compression ratio = volume at BDC (swept volume + volume at TDC) / volume at TDC
What is the comparison of the volume of space between the piston's top surface and the top cylinder at BDC and TDC is called?
The answer is Compression Ratio. You should try reading the Study Unit it really helps!
Even If The Crank Shaft and Cam Shafts 3.0l 94 Chrysler Lebaron have timing marks Could you still be 180 degrees off and still end up with exhaust value open even though the number one piston is TDC?
yes, tdc is when the number one cylinder is a top dead center in the compression stroke, you may be at the top of the exhaust stroke. yes to correct this you need to remove distibuter and turn distributer shaft 180 degrees and then reinstall distributor
How do you tighten down hydraulic rockers to specifications without over tightening?
torque wrench Not with a torque wrench ! Obtain your proper specs (clearance and sequence at TDC for each corresponding valve) set the valves using the specs obtained and the proper thickness gauge .Tighten each rocker to valve clearance until you have a slight drag on your gauge between the rocker and valve.
What is the mean tdc?
top dead center
What is Fullform of TDC?
TDC
What does tdc mean when refering to a 1997 Jeep Cherokee?
top dead center
What does TDC mean in an engine?
Top dead center. It is when a piston is at its highest position.
If the crank gear is tdc is the number 1 cylinder tdc on 94 f150 5.8L?
Yes it is, It has no choice but to be at TDC.
What does the error code 8 mean on a 1990 Honda Accord?
TDC Sensor (Top Dead Center)defective circuit or unplugged / defective sensor
Where is the TDC sensor located on a 2000 Honda Odyssey?
were is the tdc problem
When was TDC Northern Stars created?
TDC Northern Stars was created in 2010.
What are the symptoms of a bad TDC sensor?
what are the symptoms of bad tdc o2 sensor
Where is the TDC sensor on a 1999 scenic 1.6?
where is the tdc sensor on a 2003 scenic 1.6
Where is the TDC sensor located on Honda civic?
where is the tdc in my 98 civic ex sedan
How do you replace the TDC sensor on a Renault scenic?
How do you change the TDC sensor on the Renault Scenic RX4
