A standard six-sided die has a total of 21 dots. This is calculated by summing the dots on each face: 1 + 2 + 3 + 4 + 5 + 6 = 21. Each face of the die has a specific number of dots representing its value.
it has adkdgbsgbsd'g SD
To separate 10 dots with 4 lines, you can create a square with 4 dots at the corners and one dot in the center. This arrangement allows each line to intersect with at least 2 dots, effectively separating all 10 dots.
A standard deck of playing cards contains a total of 52 cards, with each card featuring a varying number of dots (pips) depending on its rank. The ranks from Ace to 10 have 1 to 10 dots respectively, while face cards (Jack, Queen, King) do not have dots. If we calculate the total number of dots from the numbered cards only (1 to 10 in each of the four suits), there are 220 dots in total.
A set of double six dominoes contains 28 tiles, each representing a combination of two numbers ranging from 0 to 6. The total number of dots on all the tiles can be calculated by summing the dots on each tile. Each number appears several times across the tiles, resulting in a total of 168 dots in the entire set.
i think 25 im pretty sure there are 5 rows of 5
Your brakes need servicing.
If I am not wrong, no matter how many dots you have in that circle, it will have infinite lines. All circles have infinite straight lines.If you are talking about other lines and not straight lines, then my answer is not applicable.Assuming you mean to ask, "How many times can I connect ten dots on the outer edge of a circle?", then the answer is 42. If you're not connecting dots immediately next to each other, then you can draw only 32 lines.
There are four speed sensors on a 99 BMW 328i. One sensor is located on each of the four wheels.
A pair of dice has a totla of 42 dots, 21 on each die.
A standard six-sided die has a total of 21 dots. This is calculated by summing the dots on each face: 1 + 2 + 3 + 4 + 5 + 6 = 21. Each face of the die has a specific number of dots representing its value.
you draw two circles beside each other and then put three dots in them then you make a triangle above the circles then draw a loop for the tongue and then draw half a circle from one circle to the other then draw some eyes and make some ears.
it has adkdgbsgbsd'g SD
You start by drawing a circle then draw 3+ dots on the circled edge, next connect all the dots with each other but don't go over the same line twice. for a 4 dotted circle you should end up with 6 lines altogether and with 5 you should have 10 lines altogether also 6-15 7=21 10=45 11=55 12=66
it means 2 dots open each door it a ridol so 2 dots open 1 door 4 dots open 2 doors and 6 dots open 3 doors
To separate 10 dots with 4 lines, you can create a square with 4 dots at the corners and one dot in the center. This arrangement allows each line to intersect with at least 2 dots, effectively separating all 10 dots.
Three of the dots are the vertexes of an equilateral triangle, the other three dots are the midpoints of the triangle's sides and the seventh dot is the centroid.